Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle TDA5024010/01

Fabricant : Bosch
Taille : 1.75 mb
Nom Fichier :
Langue d'enseignement: ruplsvukitentresfrdenlhuptdafiro
Aller à la télécharger



Facilité d'utilisation


• The appliance must never be placed directly under the tap to ill the water tank. • Unplug the appliance from the mains supply after each use, or if a fault is suspected. • The electrical plug must not be removed from the socket by pulling the cable. • Never immerse the iron in water or any other luid. • Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.). Beforeusingyourappliancefortheirst time remove any label or protective cover fromthe soleplate. Fill the tank of the iron with tap water and set thetemperature control to “max”. Plug in theappliance to the mains. When the steam iron has reached the desired temperature, let the water create steam by setting the steam control to“max” and by repeatedly pressing the button . During it irst use the iron may producecertain vapours and odours that will die awayafter a few minutes. Usingtheappliance The pilot light switches on while the appliance is heating up and switches off as soon as the settemperature is reached. lf the temperature of thehot iron drops, you can continue ironing while theiron heats up again to the set temperature. Sort laundry according to the fabric care labels and start at the lowest temperature “•”: • Synthetics •• Silk – Wool ••• Cotton max Linen 1Fillingthewatertank Set the steam regulator to the positionand unplug the iron from the mains! Use only clean water from the tap without mixinganything with it. The addition of other liquids, such as perfume, will damage the appliance. any damage caused by the use of theaforementioned products, will make theguarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliancehas been designed to use normal tap water. To prolong the optimum steam function, mix tapwater with distilled water 1:1. If the tap water inyour district is very hard, mix tap water withdistilled water 1:2. Never ill beyond the “max” water level mark. ENGlISH 13 BOSCH 2Ironingwithout steam2Ironingwithout steam Set steam control to the position. ENGlISH 3Ironingwithsteam Temperature Recomended steam setting regulator setting •• 1 or 2 / eco* ••• to “max” 1 to “max” * model dependent 4Spray Do not use the spray function with silk. 5Shot of steam • Set temperature to “max”. • Press button repeatedly with intervals of atleast 5 seconds. 6verticalsteam Never direct the steam jet at garments that are being worn. Never aim the steam at people or animals. • Set temperature to “max”. • Hang article of clothing on a clothes hanger. • Operate the iron in a vertical position at adistance of 10 cm / 4 in, and press the button repeatedly with pauses of at least 5 seconds. 7multipledescalingsystem Depending on the model, this range is equippedwith the “AntiCalc” (=component 1 + 2 + 3). 1. self-clean Each time you use the steam regulator, the“self-clean” system cleans the mechanism ofscale deposits. 2. Calc’nclean The “calc’nclean” function helps to remove scaleparticles out of the steam chamber. Use this fun...

Ce manuel est également adapté pour les modèles :
Fers - TDA502401E/01 (1.75 mb)
Fers - TDA502411E/01 (1.75 mb)
Fers - TDA502801T/01 (1.75 mb)
Fers - TDA5028110/01 (1.75 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories