Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
The fabric-protection soleplate cover may be purchased from the customer service or specialist shops: Accessory code (After-sales) Name of accessory (online shop) 571510 TDZ2045 464849* TDZ1520* * Cork handle iron FCalc’n’Clean Cleaning the Boiler To extend the life of your steam generator and to avoid any build up of scale, it is essential that you rinse out the boiler after several hours of use (approximately after 50 hours). If the water is hard, increase the frequency. Do not use descaling agents for rinsing out the boiler, as they could damage it. 1. Check that the appliance is cold and unplugged for more than 2 hours, and that the water tank (1) is empty. 16 BOSCH 2. Place your appliance on the edge of your kitchen e) Wait until the “steam ready” indicator lamp (8) sink. 3. Remove the plastic cover located on the bottom of the appliance by turning it to the position. 4. Unscrew the boiler drainage plug using a coin. 5. Holding your steam generator in upside down position, and using a jug, ill the boiler (in the base unit) with 1/4 litre of water 6. Shake the base unit for a few moments and then empty it completely over a sink or bucket. To obtain the best result, we recommend that this operation is done twice. Important: before re-closing, make sure no water remains in the boiler. 7. Replace and tighten up the boiler drainage plug with a coin. 8. Insert and close the plastic cover by turning it to the position. GRinsingtheironsteamchamber Caution! Risk of burns! This procedure helps to remove scale particles out of the steam chamber. This cleaning procedure may be performed occasionally (approximately once a year), when after a long period of use with very hard water, scale particles start to come out of the soleplate. a) Ensure that the iron is cooled down. b) Set the temperature selector (13) of the iron to the “min” position. c) Fill the tank with tap water. d) Plug in the mains cable and set the main power switch (11) to the “I” position. lights up. f) Hold the iron over the sink or a container to collect the water. g) Press the steam release button (14) and gently shake the iron. Boiling water and steam will come out, carrying scale and or deposits that might be there. This could take approximately 5 minutes. h) Set the temperature selector (13) of the iron to the “max” position, without pressing the steam release button (14). The water in the steam chamber will start evaporating. Wait until all the water inside the chamber has been evaporated. i) To clean the soleplate, immediately rub off any residue by running the hot iron over dry cotton cloth. Adviceondisposal Our goods come in optimised packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials. Your local town council can give you information about how to dispose of obsolete appliances. This appliance is labelled inaccordance with European Directive2002/96/EG concerning usedelectrical and electronic appliances(waste electrical and electronicequipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicablethroughout the EU. ENGLISH TroubleshootingProblemPossiblecausesSolution The steam generator does not come on. The iron does not heat up. • There is a connectio...
Ce manuel est également adapté pour les modèles :Fers - TDS2011/02 (3.17 mb)
Fers - TDS2011/03 (3.17 mb)
Fers - TDS2016/01 (3.17 mb)
Fers - TDS2016/02 (3.17 mb)