Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
if the tap water in your district is very hard, mix tap water with distilledwater 1:2. • you can inquire about the water hardness with your local water supplier. • The water tank can be filled at any time while using the appliance. • To avoid damage and/or contamination of the water tank and the boiler, do not put perfume, vinegar, starch, descaling agents, additives or any other type of chemical product into thewater tank. any damage caused by the use of the aforementioned products, will make the guarantee void. • Do not use condensation water from tumble dryers, air conditioning systems or similar. This appliance has been designed to use normal tap water. • The iron is not designed to rest on its heal. please always position it horizontally on the iron pad (2). • The iron pad can be placed into the specially designed recess on the appliance orsomewhere suitable alongside the ironing area. Never rest the iron on the appliance without the iron pad! • During its first use the iron may produce certain vapours and odours, along with white particleson the soleplate, this is normal and it will stopafter a few minutes. • While the steam release button is pressed, the water tank may produce a pumping sound, this is normal, indicating that water is beingpumped to the steam tank. Setting the temperature 1.Check the ironing instruction label on the garment to determine the correct ironing temperature. 2.Turn the temperature selector (11) to the required setting: • Synthetics •• Silk – Wool ••• Cotton – linen 3.The indicator lamp (14) will remain lit while the iron is heating and go out as soon as the ironhas reached the selected temperature. Tips: • Sort your garments out based on their cleaningsymbol labels, always starting with clothes thathave to be ironed at the lowest temperatures. • if you are not sure what the garment is made of then begin ironing at a low temperature anddecide on the correct temperature by ironing asmall section not usually seen when worn 2 Ironing with steam The steam control is used to adjust theamount of steam produced when ironing. 1.Turn the temperature selector (11) to the required setting. 2.Set the amount of steam to suit your needs, using the variable steam control (5*) (depending on the model). For normal use, please choose one of the following recommended settings: Temperature Steam setting • ••• 3.press the steam release button (12-13*) to release steam. attention: When ironing on a lower temperature setting “•”. • if the appliance has variable steam control (5*), set the variable steam control to its lowestposition . • if the appliance does not have variable steam control, press the steam release button only fora few seconds at a time when ironing at lower temperatures. in both cases, if you find that water is dripping out of the soleplate, set the temperature selector (11) to a higher position (take care that the garmentcan be ironed on this heat temperaturesetting). • at the beginning of each use, it is possible that drops of water will be dispensed alongside steam. Therefore, it is advisable to try the iron on the ironing board or a piece of cloth to start with. Tip : for better ironing results, iron the laststrokes without steam to dry the garment. 16 * Model dependent (button) B O S C H COrK HaNDLE IrON (model dependent) To get permanent steam...
Ce manuel est également adapté pour les modèles :Fers - TDS3511/01 (1.97 mb)
Fers - TDS3516/01 (1.97 mb)
Fers - TDS3525/01 (1.97 mb)
Fers - TDS3549/01 (1.97 mb)