Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions Groupe SEB USA - T-FAL, Modèle 1690

Fabricant : Groupe SEB USA - T-FAL
Taille : 483.78 kb
Nom Fichier : b60b04ce-9a43-400a-a010-534775201285.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


YOUR CORDLESS IRON A. Spray B. Tank opening flap Use tap water. C. SuperPress button To obtain more steam and smooth vertically. D. Spray button To dampen your ironing. E. Indicator lights - Thermostat Goes out when the required temperature is reached. F. Anti-scale rod Clean once per month. G. Tank max. level mark Do not exceed this limit. H. Thermostat control: To choose the temperature. I. Steam and Auto-cleaning Control To adjust the steam output and clean your iron automatically. J. Connection Block K. Base L. 3-position selector • Cordless Position : To iron without a cord. • Cord Position : To iron with a cord. • Lock Position : To transport and store your iron. M. Table grip To fix the base of your iron to your table. N. Cord winder To avoid contact between the cord and the soleplate of the iron. O. Clip To attach the cord. 1 -PREPARATION 1. Set up your iron on the table. • Unwind the cord completely. • Set the selector to Cordless and remove the iron from its base. • Turn the base over, pull out the table grip and fix it to the table at the rear. 2. Fill the tank. WHAT WATER SHOULD BE USED? Your iron is designed to function with tap water. However, you should regularly carry out auto-cleaning of the steam chamber to remove any scale deposits. If you have very calcareous (hard) water (you can check this with your water supplier), you can mix tap water with commercially-available demineralized water in the proportions: -50% tap water -50% demineralized water WHY NOT USE OTHER TYPES OF WATER? Do not use the following types of water, which may cause spitting, brown streaks or premature ageing of your iron: -commercially-available demineralized water on its own -water from spin-dryers -scented water -softened water -water from refrigerators -water for batteries -rainwater -water from air -conditioning units -distilled water air Caution • Always remove your iron from the base (cordless) before filling it. • Set the Steam control to DRY. • Open the flap of the tank, tilt the iron and fill it. Caution Do not fill above the Max indicator (with the iron on its heel). • Put it back on its base. 2 - STEAM IRONING 1. Adjust the temperature and the steam. • Position the thermostat control on the name of the fabric that you want to iron (see diagram below). To start ironing, allow the indicator to come on twice before commencing. Tip • Start by ironing fabrics which require a low temperature (•) and finish with those which require a higher temperature (••• or MAX). • If you reduce the thermostat, wait for the lamp to come on again before continuing with your ironing. • If you are ironing a mixed-fibre fabric: set the ironing temperature according to the most fragile of the fibres. • Set the Steam control to AUTO. Steam production is automatically adapted to the temperature selected. Caution • Your iron only produces steam when the thermostat control is in the coloured zone. 3 - ANTI-DRIP FUNCTION • When the iron's temperature is no longer sufficient to produce steam, the water supply is automatically cut off so that the soleplate does not "drip". • When you first use it, you must wait for 2 minutes before steam becomes available. 2. Choose your ironing mode. • Cordless: Set the cursor to CORDLESS. You can start ironing when the thermostat indicator goes out. Caution • Always put the iron back on its base for maximum ironing efficiency. Tip • Use this ironing mode for small items and fabrics that are easy to iron. • Cord: Set the cursor to CORD. You can start ironing when the thermostat indicator goes out. Tip • Use this ironing mode for large items and fabrics that are difficult to iron or when you use the SuperPress button frequently. 3. To smooth vertically • Hang up the garment and stretch the fabric. Set the thermostat control to MAX, press the SuperPress button (x) repeatedly and move the iron from the top downwards. Tip: • If you have to use the SuperPress button very frequently, use the iron with the Cord setting. • Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics. 4. To remove resistant creases • Press the Spray button repeatedly to wet the linen or use the SuperPress button. 4 - DRY IRONING: • Set the Steam control to DRY. • You can iron once the indicator goes out. 5 - MAINTAINING YOUR IRON Caution Always unplug and leave your iron to cool before cleaning it. 1. Clean the soleplate • When the soleplate is warm, clean it with a damp, non-metal pad. Caution • Do not use any cleaning products. • Never hold the iron or its base under the tap. Tip • When you use starch, spray it on the underside of the fabric and clean the soleplate more frequently. 2. Clean the anti-scale rod (once a month) • Drain the iron and set the ironing control button to DRY. • Press the anti-scale rod. Turn it anticlockwise while keeping it pushed down. • Release and remove the rod from its housing WITHOUT TOUCHING THE END. • Soak the rod for 4 hours in spirit vinegar or pure lemon juice. • Rinse the...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories