Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
DO NOT use unit if it is not working properly or has been dropped, damaged or left outdoors. If such damage occurs, DO NOT disassemble or attempt repairs, take unit to a qualified service person for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electrical shock, or injury to persons when steamer is used. 6. To reduce risk of electrical shock, DO NOT immerse in water or other liquids. DO NOT use electrical cord as a handle. DO NOT allow cord to be crimped by closing it in doors. DO NOT pull or stretch cord around sharp corners or edges. 7. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing. 8. DO NOT use this unit with extension cords or electrical outlets that have inadequate current capacity. A three-prong outlet or a properly grounded adapter is necessary when using SF-435W Compact Fabric Steamer. SAVE THESE INSTRUCTIONS! FOR HOUSEHOLD USE ONLY Top Innovations, Inc. IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. 9. In order to unplug SF-435W Compact Fabric Steamer, grasp plug and pull smoothly and firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord. 10. Use care when using SF-435W Compact Fabric Steamer at an angle. Tilting unit more than 35 degrees in any direction may cause excess water to spray out of steam nozzle. 11. Burns could occur from touching hot metal parts, hot water or steam. Use care when you turn a steam appliance upside down - there may be hot water in Water Reservoir. 12. SF-435W Compact Fabric Steamer is only meant to be used with recommended SF-435W accessories. Other types of attachments are not to be used with Compact Fabric Steamer. Doing so may cause injuries or damage to unit. 13. Nozzle and attachments become hot during use. To avoid injuries, DO NOT touch nozzle while using this appliance. DO NOT attempt to change attachments while unit is emitting steam. 14. When filling your Compact Fabric Steamer with water, DO NOT fill Water Reservoir with more than 7 oz. of water. Only water should be used in unit. Other cleaning agents will damage unit and can cause injuries. 15. Always disconnect appliance from electrical outlet when filling with water or emptying, and when not in use. 16. DO NOT operate unit if steam opening is blocked. Should this occur, immediately cease usage and unplug from electrical outlet. 17. Store your SF-435W Compact Fabric Steamer in a cool, dry place. SAVE THESE INSTRUCTIONS! FOR HOUSEHOLD USE ONLY Top Innovations, Inc. COMPACT FABRIC STEAMER PRODUCT INFORMATION COMPACT FABRIC STEAMER PRODUCT INFORMATION The following features and accessories are included with your Fabric Steamer. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 10 of this manual. UNIT FEATURES &ACCESSORIES 1. Steam Nozzle 2. Water Reservoir Cap 3. Heater Indicator Light 4. Handle 5. Reservoir Level Window 6. Water Reservoir 7. Rubber Accessory Housing 8. Fabric Brush 9. Lint Remover Top Innovations, Inc. COMPACT FABRIC STEAMER PRODUCT INFORMATION COMPACT FABRIC STEAMER PRODUCT INFORMATION • The Steam Nozzle (1) emits a flow of hot, penetrating steam. • The Water Reservoir Cap (2) safely contains steam within the Water Reservoir, and must be removed in order to fill the unit with water. • The Heater Indicator Light (3) illuminates when the unit’s heater is active. • The Handle (4) is designed to stay relatively cool while providing the optimum amount of safety and user comfort. • The Reservoir Level Window (5) lets the user clearly see how much water is in the Water Reservoir. It should not be filled above the MAX (7 oz.) fill line. • The Water Reservoir (6) is the tank in which water is stored for use by the unit. • The Rubber Accessory Housing (7) is used for connecting the Lint Remover and Fabric Brush to the Steam Nozzle. Connecting the Rubber Accessory Housing along with the Fabric Brush or Lint Remover will reduce excesive water spitting from the Steam Nozzle. • The Fabric Brush (8) fits into the Rubber Accessory Housing and delicately smoothes wrinkles from fabrics. • The Lint Remover (9) fits into the Rubber Accessory Housing, and is useful for removing lint and loose threads from fabrics. Top Innovations, Inc. USING THE COMPACT FABRIC STEAMER FILLING WATER RESERVOIR WITH WATER 1. Place Compact Fabric Steamer on a flat, level surface. 2. Make sure grounded power cord is unplugged from electrical outlet. 3. If unit has been in use, allow it to cool for at least 5 minutes. WARNING: Always allow unit to cool...
Ce manuel est également adapté pour les modèles :Fers - SF-435W (154.02 kb)