Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase. To qualify for the 2 year appliance must have been the manufacturers instructions. example kettles should have been regularly EXCLUSIONS Morphy Richards shall not be liable to replace or repair the goods under the terms of the guarantee where: 1 The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturers recommendations or where the fault has been caused by power surges or damage caused in transit. 2 The appliance has been used on a voltage supply other than that stamped on the products. 3 Repairs have been attempted by persons other than our service staff (or authorised dealer). 4 Where the appliance has been used for hire purposes or non domestic use. 5 Morphy Richards are not liable to carry out any type of servicing work, under the Ion iron steam/spray/shot Please read and keep these getting the best from your Job: Important safety instructions The use of any electrical appliance requires the following common sense rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions: WARNING: Danger to the person! IMPORTANT: Damage to the appliance! In addition we offer the following safety advice. Location • Do not use outdoors. Children • Children do not understand the dangers associated with operating electrical appliances. Never allow children to use Other safety considerations • Use the iron only for its intended • To protect against the risk of electric shock do not put the appliance or in any other liquid. • Always disconnect the iron from the electrical socket when filling with water or emptying, and when not in use. • Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice. Incorrect reassembly can cause a risk of electric shock when the iron is used. Anti-scale models only • Keep the anti-scale sachet out of reach of children. • Wipe up spilt anti-scale granules immediately. • If the granules come into accidental contact with the eyes, flush them with water for at least 15 minutes and remove Emptying and When you have finished ironing, unplug your iron. Ensure that the variable steam control is set at the ‘’ position, lift up the fill cap and empty any remaining water out of the filling hole. Do not store in the box, but in an upright position, so that any drops of water remaining cannot leak out and discolour the soleplate. Important: The flex can be damaged if wound too tightly around the iron after use. Make a loose loop with the flex and wrap it around the iron. The iron must be cool before To clean a stainless steel or anodised soleplate (certain models only) To keep the soleplate of your iron and free of limescale, we recommend you use one of the gentle chrome, stainless steel cleaners that are generally available. Always follow the manufacturers instructions. To clean off melted man-made fibres set the iron at 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface. To clean a coated soleplate (certain models only) In the unlikely event of any man-made fibre fusing to the soleplate, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface. Do not use scouring powder or solution as this could cause damage to the coating. To clean the exterior Allow the iron to cool and wipe over with a Job: No drip system Replacement anti-scale •WARNING: when not Electrical requirements Your iron is fitted with a To obtain replacement anti-should never be placed which is designed to prevent telephone our spares number an ironing board. Check that the voltage on the from the soleplate when the on: 0870 167 6646. • To prevent damage to the textile of your appliance corresponds During use, the no drip system ironed, follow the temperature house electricity supply which must C. loud click, particularly during heat-up or Filling / Refilling your anti-scale carefully. (Test the inside of the hem of the (Alternating current). whilst cooling down. This is perfectly 1 Empty any remaining garment). and indicates that the system is functioning correctly. Anti-scale system (certain models only) The anti-scale cartridge is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However, please note that the anti-scale cartridge will not completely stop the natural process of limescale build-up. Using your anti-scale iron for the first time If you are using your iron for the first time you will notice that there is no anti-scale sachet present in the anti-scale cartridge. To keep the granules in optimum working wa...