Log:
Évaluations - 1, GPA: 5 ( )

Instructions Krups, Modèle Waffle Iron

Fabricant : Krups
Taille : 289.09 kb
Nom Fichier : FDD9.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


• Do not touch hot surfaces. Use handles • To protect against electrical shock, do not plug, or complete appliance in water or other liquids. • Close supervision is necessary when any appliance near children. • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged manner. Return appliance to the nearest authorized KRUPS Service Center for examination, repair or adjustment (see enclosed list). • The use of accessory attachments not recommended or sold by KRUPS may cause injuries. • Do not use outdoors. • Do not let the cord hang over the edge of the table or counter, or touch hot surfaces. • Do not place on or near a hot gas or electric burner or in a heated oven. • Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. • To disconnect remove plug from wall outlet. • Do not use the appliance for other than intended household use. • Do not use metallic fasteners to hold the waffles in place. Sharp utensils should not be used. • Always check that the voltage indicated on the identification panel matches that of your electrical installation. • For household use only. Using the appliance for other than its intended use will void the warranty. • Position the surface. • Do not leave or • Do not touch the • When the appliance • A fire may occur if the appliance with flammable material including curtains, draperies, walls, SAVE THESE INSTRUCTIONS CAUTION This appliance is for household use. Any cleaning and user maintenance should be performed authorized KRUPS Service Center (see enclosed • Do not immerse appliance in water. • To reduce the risk of fire or electric shock, do not dismantle the appliance. No user serviceable parts inside. Repair should by an authorized KRUPS Service Center only. SPECIAL CORD INSTRUCTIONS A. A short power-supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. B. Extension cords are available and may be used if care is exercised in their use. C. If an extension cord is used, (1) the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally. D. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. English Thank you for this KRUPS appliance. Whatever model these instructions carefully and keep them reference. Description (1) a “On/off” light (red) b “Ready” light (green) c Adjustable thermostat d Handle release button e Handle f Removable waffle plates g Plate retaining pins h Notches for easier handling of plates i Spill tray j Non-removable cord For U.K. users only : additional information and instructions WIRING INSTRUCTIONS WARNING: ALL APPLIANCES MUST BE EARTHED. IMPORTANT: the wires in this lead are coloured in accordance with the following codes. Green and Yellow : Earth Blue : Neutral Brown : Live Connect the Green/Yellow wire to the terminal in the plug marked “E” (or by the earth symbol) or coloured Green. N: Blue E: Green and or black yellow or green L: Brown or red Fit correct fuse(13 amp) Use cable gripper Connect the Brown wire to the terminal plug marked “L” Red. Connect the Blue wire to the terminal in the plug marked “N” or coloured Black. Seek professional advice if you are unsure of the correct procedure for the above. ABOUT YOUR FACTORY FITTED PLUG The cord is already fitted with a plug incorporating an appropriate fuse. If the plug does not fit your socket outlet, see paragraph below. Should you need to replace the fuse in the plug supplied, an appropriately rated approved BS 1362 fuse must be used (refer to electrical specification for fuse rating). If the plug supplied does not fit your socket outlet, it should be removed from the mains lead and disposed of safely. The flexible cord insulation should be stripped back as appropriate and a suitable alternative plug fitted. The replacement plug must be equipped with an appropriate fuse. If the plug has external access to the fuse (non-rewirable type plug) please note that the fuse cover is an important part of the plug. Please ensure that it is always refitted correctly. If you lose this cover, please do not use the plug. You may contact our helpline for a replacement. For any problems or queries, please contact our Customer Relations Team first for expert help and advice: 0845 602 1454 – UK (calls charged at local rate) (01) 47 51947 – Ireland Handling the pla...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories