Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
CAuTION: safety auto off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety auto off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged. After Each Use Set the steam selector to the DRY position and turn the Temperature Control to MIN. Switch the power off at the power outlet and disconnect the power cord from the power outlet. Open the water filling cap and (over a sink or bucket) invert the iron to empty the remaining water from the tank. Stand the iron in an upright position and allow to cool. KI730_KI760_KI760P_KI780_IB_FA.indd 11 19/01/10 3:40 PM 12 Care and Cleaning To ensure your iron maintains optimum performance it is recommended that it be cleaned using the Self-Clean function to remove scale or impurities. • Set the steam selector to the DRY position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set the Temperature Control to MAX (Linen) setting. • Place the iron in the upright position, insert the plug into the power outlet and switch the iron on. • Allow the iron to heat until the heating indicator light turns off. • Switch the iron off at the power outlet and remove the plug. • Hold the iron horizontally over the sink. • Press and hold the SELF CLEAN button. • Water will drip through the holes in the soleplate. Move iron until all water has dripped out of the water tank. NOTE: Once you have used the Self-Clean function, it is normal for some water to remain in the water tank. This is due to the Anti-Drip System preventing the tank from being emptied completely. This will not affect the performance of the iron. Repeat the Self Clean process if the iron still contains a lot of impurities. CAuTION: Only push and hold the self clean button when you want to activate the self cleaning function. Do not push and hold whilst ironing. Boiling water and steam will drip from the holes in the soleplate during the cleaning process. Due caution and attention should be exercised. Cleaning the Soleplate and Exterior Ensure that the iron is disconnected from the power outlet. To remove residue which may have built up from certain fabric finishes, clean the soleplate with a rough cloth that has been soaked in a vinegar and water solution. Dry thoroughly with a soft cloth. To clean the steam holes, simply use a damp cloth to wipe away build up of lint or starch from inside the steam holes. Wipe the outer housing with a soft, damp clean cloth and polish with a dry cloth. KI730_KI760_KI760P_KI780_IB_FA.indd 12 19/01/10 3:40 PM NOTE: Once you have used the Self-Clean function, it is normal for some water to remain in the water tank. This is due to the Anti-Drip System preventing the tank from being emptied completely. This will not affect the performance of the iron. Repeat the Self Clean process if the iron still contains a lot of impurities. CAuTION: Only push and hold the self clean button when you want to activate the self cleaning function. Do not push and hold whilst ironing. Boiling water and steam will drip from the holes in the soleplate during the cleaning process. Due caution and attention should be exercised. Cleaning the Soleplate and Exterior Ensure that the iron is disconnected from the power outlet. To remove residue which may have built up from certain fabric finishes, clean the soleplate with a rough cloth that has been soaked in a vinegar and water solution. Dry thoroughly with a soft cloth. To clean the steam holes, simply use a damp cloth to wipe away build up of lint or starch from inside the steam holes. Wipe the outer housing with a soft, damp...
Ce manuel est également adapté pour les modèles :Fers - KI760P (2.02 mb)
Fers - KI760 (2.02 mb)
Fers - KI780 (2.02 mb)
Fers - STEAMLINE KI730 (2.02 mb)