Évaluations - 5, GPA: 4.4
(
)
)
|
Facilité d'utilisation
This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way. Use the iron on an ironing board. Ironing on any other surface may damage that surface. -e- 840072900 Ev04 9/21/00 8:44 Page 3 Before First Use • The steam vents on the soleplate must be cleaned before first use. Follow instructions in the “Self-Clean System” section. This will assure steam vents have been thoroughly cleaned. • Remove any peel off labels from the iron and wipe any manufacturing residue from the soleplate and vents. During the first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. CAUTION: Some irons spit or sputter water during the first few uses. This happens as the steam chamber becomes conditioned. This will stop after a few uses. Know Your Iron Parts and Features [Y] Spray Nozzle Spray Button Blast of Steam Button [4~| Self-Clean/Temperature/ Steam Dial Auto Shutoff Reset Button/Light* |~S~1 Swivel Cord* [Y] Fabric Setting Guide |~8~] Retractable Cord* [~9~] Cord Release Button* 10 Protective Soleplate Shield* * Selected features not available on all models. tmk |l| 3 840072900 Ev04 9/20/00 16:44 Page 4 Using Your Iron To Dry Iron 1. Plug iron into electrical outlet. The Auto Shutoff Reset Button/Light will come on. If the plug will not fit, read about the polarized plug in “Consumer Safety Information.” 2. Turn the Temperature/Steam Dial to a setting in the Dry Iron range, settings 1-3. As an example, the illustration shows the iron set at 2 (Nylon). NOTE: To dry iron at setting 4 and highter, empty all water from the iron. 3. Preheat for about four minutes before beginning to iron. 4. The iron will automatically shut off one hour after the iron is plugged in and the Auto Shutoff Reset Button/Light will go out. To turn the iron back on, press the Auto Shutoff Reset Button/Light located on the top of the handle. 5. When finished ironing, turn the Temperature/ Steam Dial to 0 (OFF) and unplug iron. To Steam Iron 1. Fill water tank following instructions in “Filling the Water Tank.” 2. Plug iron into electrical outlet. The Auto Shutoff Reset Button/Light will come on. If the plug will not fit, read about the polarized plug in “Consumer Safety Information.” 3. Turn the Temperature/Steam Dial to a setting in the Steam Iron range, settings 4-9. As an example, the illustration shows the iron set at 7 (Rayon). 4. Preheat for about four minutes before beginning to iron. The iron will automatically shut off one hour after the iron is plugged in and the Auto Shutoff Reset Button/ Light will go out. To turn the iron back on, press the Auto Shutoff Reset Button/light located on the top of the handle. When finished ironing, turn the Temperature/ Steam Dial to 0 (OFF) and unplug iron. Allow to cool and empty water from water tank. See “Storing Your Iron.” e 840072900 Ev04 9/20/00 16:44 Page 5 Filling the Water Tank 1. Make sure iron is unplugged. 2. Regular tap water should be used. In areas with extremely hard water, the use of distilled or filtered water is highly recommended. 3. Slowly pour water into water fill opening until water level reaches the top of the Water Window (8 ounces). Never overfill. NOTE: Never place anything in your iron except water. Products like liquid starch will damage your iron and clothing if placed in the water tank. Temperature Dial and Fabric/Setting Chart Setting To Iron Ironing Instructions c 0 Off/Clean o 1 Acetate Dry iron on the wrong side of the fabric. i* 2 Nylon Dr}' iron; use spray if necessary. a :i Acrylic Dry iron; use spray if necessary. 0) A Silk, Lycra Iron on the wrong side of the fabric. 05 e 5 Wool Use a pressing cloth and steam iron. (0 cc 6 I’olyesrer Iron while fabric is still damp. E as 7................ Rayon Iron on the wrong side of fabric. a> «-> C/3 8 Cotton Iron while still damp. 9 Linen Iron on wrong side while fabric is still damp. NOTE: To dry iron on settings 4-9, empty all water from the tank. Ironing Tips • Always check fabric content before ironing. If the fabric is a blend, use the lower temperature setting. • If the fabric content is unknown, use the lowest temperature setting and test on an inside seam of the garment. • If ironing several items, start ironing the items which need the lowest temperature setting first. An iron heats up much faster than it cools down. • To maintain the quality of the soleplate, never iron over zippers, pins, buttons, or anything metal. • Use caution when ironing around plastic buttons and zippers as these may mel...