Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
cotton with polyester) you must always select the lowest ironing temperature for the composition of those fibres. SETTING THE TEMPERATURE • Insert the plug into the wall socket and stand the iron upright. • Turn the temperature control knob (8) to the correct temperature. • The correct temperature will be reached when the pilot light has turned off. The pilot light will be on and off from time to time indicating that the selected temperature is being maintained. SPRAYING This function can be used any time and it does not affect the ironing temperature. • Fill water into the iron as described above. • Aim the nozzle to the garment. • Press the spray button (5) STEAM IRONING This function can be used only at a higher ironing temperature. • 2 dots for moderate steam • 3 dots or MAX for maximum steam • Fill water into the iron as described above. • Stand the iron upright. • Connect the iron to a suitable mains supply outlet. • Turn the temperature control (8) to the “2 dots”, “3 dots” or “MAX” setting. • The pilot light turns off when the required temperature is reached. The iron is ready for use. • Turn the steam button (6) to the required position, steam starts coming out from the holes in the soleplate. Note: With conventional steam ironing, water may leak from the soleplate if a too low temperature has been selected. If this happens, turn the temperature control (8) to the advised position. Steam will recommence as soon as the appropriate temperature has been reached. DRY IRONING 1. Connect the iron to a suitable mains supply outlet. 2. Ensure that the steam control knob (6) is in position “O”. 3. Select the setting on the temperature control (8). 4. When the pilot light turns off, the required temperature is reached. The iron is ready for use. CARE AND CLEANING 1. Disconnect the iron from the wall outlet and let it cool down completely. 2. Deposits and other residues on the soleplate can be removed with a rough cloth soaked in a vinegar/water solution. 3. The casting may be wiped with a damp cloth and then polished with a dry one. 4. Never use any abrasives to clean the soleplate. 5. Keep the soleplate smooth: avoid hard contact with metal objects. STORAGE • Turn the temperature control (8) to “MIN” and set the steam control knob to position “O” (=no steam) • Disconnect the iron from the wall outlet. • Pour any remaining water out of the water tank. • Stand the iron upright and let it cool down completely. • The power cord can be wound around the iron. • Always store the iron in an upright position. SAFETY PROTECTIVE CUT – OUT In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent the iron overheating. Then the iron should be taken to the nearest authorized service facility. MW CO23009GR Eve_IM Folder.indd 3 5/6/2009 11:06:49 AM Iron is leaking water. TROUBLE SHOOTING Problem Reason Temperature is too low Steam switch is on self clean function Tank is overfilled Iron is in the horizontal position too long. Temperature control dial is in the off position Household socket is off. Household socket is not working Overloaded circuit. Temperature is too hot Clothing is dirty or not rinsed thoroughly. Item is too dry or temperature too low. The steam control is off or set too low. The iron temperature is too low. The steam valve is blocked due to water scale. Pre-caution Check fabric type is suitable for high steam temperature Switch steam setting to 0 (off) after use or when filling tank. Fill to MAX mark only. If iron is left on the item in the horizontal position for too long it may burn the fabric. Check temperature setting is suitable for fabric type. Ensure iron is in the upright position. Appliance must be of similar wattage to prevent overloading. Note that there can be up to 5 household plug sockets on 1 circuit. Check temperature setting is suitable for fabric type. Use a old linen cloth to remove any trace of dirt on the soleplate. Use iron soleplate cleaner for bad marks. Check temperature setting is suitable for fabric type. Ensure temperature control dial is set to the 3 dot position for steaming. Check temperature setting is suitable for fabric type. Use distilled or demineralised water in your iron to prevent blocking. Action Set the temperature to steam setting (cotton) Turn steam switch setting to steam or 0 position Empty water tank When adjusting item place iron down in the vertical position Turn the temperature control dial to the desired temperature setting. Switch on household socket Check the socket with another appliance Unplug all appliances attached to the same circuit and check iron. Turn down temparature on control dial. Clean and rinse item. Use spray function to dampen item and check temperture is correct. Use steam function. Set the steam button/switch to on or full. Set temperature control dial to MAX or 3 dot position for steaming. If your iron is fitted with a self clean function carry out cleaning as per instructions. Iron is not heating...