Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Please read this instruction manual carefully and familiarize yourself with your new steam iron. Before using the first time, please retain this manual for future reference. A C D E F G H I J K B A. Spray Nozzle B. Water filling inlet C. Steam control turning knob D. Burst of steam button E. Spray Button F. Soft touch grip G. Temperature control dial H. Power cord protector I. Water tank J. Ceramic soleplate K. Self-cleaning button MW_WX23600_PROGLIDE_IRON_IM.indd2 22 MW_WX23600_PROGLIDE_IRON_IM.indd 7/21/20097/21/2009 4:41:31 PM 4:41:31 PM IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be followed: • Make sure the voltage used corresponds with the one indicated on the rating label. • Use the iron only for needed use as described in the instruction manual. Close supervision is necessary when any appliance is used near children. Do not leave iron unattended while connected or on an ironing board. Burns can occur from touching hot metal parts, hot water or steam. • Keep the iron out of reach of children. • The iron should never be left unattended while it is connected to the mains supply. • Unplug the iron from the mains electrical supply before: 1) Cleaning 2)Filling with water or emptying the water tank 3) Immediately after use • Never operate the iron with a damaged power cord or plug, or after it has fallen or been damaged in any way. To avoid the risk of electric shock, do not disassemble the iron. Take it to a qualified serviceman for examination and repair. • Do not let the cord touch hot surfaces. • To protect against a risk of electric hazards, do not immerse the iron in water or any other liquid. • The iron must be used and rested on a stable surface. • The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. BEFORE FIRST USE • It is normal for a small amount of smoke to be produced the first time, this will quickly disappear. • When using the steam function for the first time, do not direct the steam towards the laundry, as there could be debris from the steam vents. FILLING WITH WATER • Make sure that both the Steam Control turning Knob and Temperature Control Dial are in “OFF” position. • Hold the iron upright so that the water-filling inlet is in a horizontal position. • Fill with water through Water Filling Inlet until the water reach the “MAX” mark indicated on the side of the iron, and never fill above this mark. SETTING TEMPERATURE Follow the ironing instructions on the garment label. If there is no instruction but you do know the kind of fabric, please consult the following table. Note: If the fabric consists of various kinds of fabrics, always select the temperature required by the most delicate fabrics. FABRIC TEMP. CONTROL TEMP. REQUIREMENT Synthetic • Low temperature Silk, wool •• Medium temperature Cotton, linen ••• High temperature MW_WX23600_PROGLIDE_IRON_IM.indd3 33 MW_WX23600_PROGLIDE_IRON_IM.indd 7/21/20097/21/2009 4:41:32 PM 4:41:32 PM STEAM IRONING DRY IRONING • Place the iron in a vertical position and set the temperature control dial at the minimum/low heat setting. • Insert the plug into the socket, and then turn the temperature control dial to the “high heat” marking. The pilot light will come on, indicating that the iron is heating up. • When the pilot light turns off, the set temperature has been reached and the iron is ready to use. • During ironing, the pilot light on the iron automatically switches on/off as the thermostat maintains the set temperature (you may continue ironing during this process). • Turn the steam control turning knob to the required position. • Steam is produced as soon as the iron in held horizontally. SPRAYING • Press the spray button to spray water on clothes, as often as required. Note: When using the water spray function, ensure that there is enough water in the water tank, and you may have to pump the spray button several times the first time you use the iron in order to start the spraying function. BURST OR VERTICAL STEAM IRONING • Press the burst of Steam button to generate a powerful burst of steam that can penetrate the fabrics and smooth the most difficult and tough creases. Wait for a few seconds before pressing again. • By pressing the Burst of Steam Button at intervals you can also iron vertically (curtain, hung garments, etc.) Note: The burst steam function can only be used at high temperature. Stop the emission when the pilot light turns on, then start ironing again only after the pilot light has turned off. For ironing without steam, follow the instruction in section “steam ironing”, however, the steam control turning knob should remain in position “O” (no steam). ANTI-CALC SYSTEM A special filter inside the water tank softens the water and prevents scale build-up in the soleplate. The filter is permanent and does not need replacing. Note: Use tap water only. Distilled and demineralized water makes the anti-calc system ineffective by altering its p...