Log:
Téléchargements : 2   Taille : 71 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Connect the iron to the mains electricity supply Plug in the iron. The warning light goes on and indicates that the iron is heating up. As soon as the light goes out, the set temperature has been reached and the iron is ready for use. 4 ADJUSTABLE STEAM FUNCTION Set the variable steam control to required steam volume. Steam can only be produced when the thermostat is aligned to l l l or max. (red zone). Allow iron to heat up (light goes out) before activating the variable steam control. Anti-dri

Téléchargements : 48   Taille : 142 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Important: Always empty the water tank when you have finished ironing! WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or using inexpensive bottled spring water. Never use 100% distilled water since this can cause the iron to spit and leak. Softened water There are many types of househ

Téléchargements : 7   Taille : 175 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

2. Turn the unit to off (see section Turning On and Off) and unplug from outlet. 3. Slowly unscrew the boiler cap. Using a water pitcher, fill with 33 oz. of water. Do not fill water tank past the base of the boiler cap thread. Be sure that water does not spill over. If this occurs remove the excess water. 4. Replace the boiler cap and screw it on tightly. 5. Plug back in to electrical outlet. AFTER IRONING 1. Turn the unit off. (Consult section Turning On and Off.) 2. Unplug the appliance. 3. P

Téléchargements : 26   Taille : 175 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. 3. The appliance should always be turned off before plugging or unplugging from outlet. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Always disconnect appliance from electrical outlet when filling with water or emptying when not in use. 5. Do not allow cord to touch hot surfaces. Let iron cool completely b

Téléchargements : 33   Taille : 207 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Do not add anything to the contents of the water tank and do not use water from clothes dryers, scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled water or rain water. These contain organic waste or mineral elements that become concentrated when heated and cause spitting, brown staining or premature wear to your iron. Tip: Spray starch onto the reverse side of the fabric to be ironed. Setting the temperature C D Ironing label Fabric Temperature con

Téléchargements : 32   Taille : 245 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 5. Always disconnect iron from electrical outlet

Téléchargements : 4   Taille : 259 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

• To protect against a risk of electric shock, do not immerse the iron in water or other liquids. • The iron should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. • Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. • Always disconnect iron from electrical outlet when filling iron with water, emptying i

Téléchargements : 5   Taille : 260 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Steam Chamber Cleaning Function This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month. . Fill the iron with cold tap water halfway to the max line and set variable steam lever to min. . Stand on heel and plug in. . Set thermostat dial to maximum (lll ) position. . When the iron reaches the correct temperature, indicator light will go ou

Téléchargements : 25   Taille : 269 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Set the temperature for the type of material to be ironed. Anti Calc System Minerals in water can build up in the steam chamber. The Anti Calc system contains a special resin that neutralizes the harmful minerals. This system is designed to extend and maintain the high steam performance of the iron. The cartridge is not replaceable. Note: Do not use descaling agents in your iron. Anti-Drip System In order to produce steam, all irons require a high temperature. If the soleplate is not hot enough

Téléchargements : 1   Taille : 271 kb   Fabricant : Rowenta  
Catégorie : Fers
@name

Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids. 3. The appliance should always be turned to Minimum (Min) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet, instead grasp plug and pull to disconnect. 4. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away. Loop cord loosely around appliance when storing. 5. Always disconnect app





catégories