Read all instructions carefully. 2. Use iron only for its intended use. 3. To protect against risk of electrical shock, do not immerse the iron in water or other liquids. 4. Never yank cord to disconnect fromoutlet. Grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. 6. Always disconnect iron from electricaloutlet when filling with water, emptying, or when not in use. 7. Do not operate iron with a damaged cord, or after the
• Water tank may be empty or water level is very low. Add water. • Make sure that the fabric/temperature setting and the variable steam control are correctly set. For maximum steam, (setting ‘Max’ on steam control), temperature setting should be set on ‘• •• ’. • Variable steam control dial is set on “0”. Always allow the iron to reach the selected temperature with the variable steam control setting at ‘0’. Make sure the temperature setting is set in the correct steam area, e.g. ‘•’, and the ste
To fully enjoy the advantages of your appliance, please take a few minutes to read all the “ Use & Care Instructions” andkeep the instructions handy for easy reference. Please review the product warranty and mail the owner registration form. Model GI460 Printed in China 10 IMPORTANT SAFEGUARDS When using your garment steamer/iron, basic safety precautions should always be followed, including the following: 1. Read all instructions carefully. 2. Use garment steamer/iron only for its intended use.
090505 Illustrations may differ with actual product SC637SC637C English English IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS For Household Use Only 1. Use garment steamer only for its intended use. WHEN USING YOUR SHARK GARMENT STEAMER, BASIC SAFETY PRECAUTIONS 2. DO NOT leave appliance unattended while it is in operation SHOULD ALWAYS BE or while it is FOLLOWED, INCLUDING THE still hot. FOLLOWING: 3. Close supervision is necessary for READ ALL INSTRUCTIONS any appliance being near chil
SC637 SC637C DATE OF PURCHASE: …………………….. MODEL: ………………................................... NAME AND ADDRESS OF STORE: ………………………………………………………………….. TOLL FREE: 1-800 798-7398 11Trouble Shooting PROBLEM POSSIBLE REASONS SOLUTIONS There is no steam. The steamer is not turned on. There is not enough water in the unit. Verify that the green light on the unit is lit. If not, check that the unit is plugged in and the on/off button is raised and in the “On” position. Verify that the water line is above t
ANTI-DRIP FEATURE Built-in Anti- Drip feature helps reduce water spots by cutting the water flow when the iron temperature is too low to build sufficient steam. The anti-drip function reduces water dripping and water stains. It does not prevent water dripping and water stains if you press the steam burst button too often or if the temperature is too low. The amount of water droplets will eventually decrease after the iron is used for 2 to 3tankfulsof steaming and ironing. Fig. 9 Fig. 2 All marke
4. From time to time, clean the exterior of the iron with a damp cloth and wipe dry. 5. If you use spray starch, wipe the soleplate occasionally with a soft damp cloth to prevent the build-up of deposits. 6. If the iron has not been used for a few weeks, hold the iron horizontally and allow to steam for 2 minutes before ironing. OPERATING INSTRUCTIONS This appliance is for HOUSEHOLD USE ONLY and may be plugged into any 120V AC polarized electrical outlet. Do not use any other type of outlet. WAR
Cords rated for less amperage may overheat. Use care to arrange the cord so that it cannot be pulled or tripped over. 13. WARNING: Never fill the iron with fabric conditioner, starches or any other solution, as these will damage the steam mechanism. Do not use contaminated water. 14. CAUTION! TO AVOID FIRE, never leave iron unattended while it is plugged in. 15. CAUTION! TO PREVENT ELECTRIC SHOCK, never use the iron in a location where it can fall or be pulled into water or another liquid. If th
6. Set variable steam control to " 0". 7. Allow iron to cool in an upright position before storing. WARNING! Use caution when emptying the iron. Burns may occur from touching hot metal surfaces, hot water or steam. STORAGE1. Always turn the variable steam control to “0” after you have emptied the water tank. 2. Allow the iron to cool down. 3. Always store the iron in the upright position to protect the soleplate. 4. From time to time, clean the exterior of the iron with a damp cloth and wipe dry
( Fig. 8) To reset your iron and continue ironing follow these steps. 1) Lift iron from ironing board. 2) Holding the iron horizontally in front of you, gently rock the iron back and forth several times. This motion will reset the safety switch inside the iron. DO NOT shake the iron. The ambertemperature ready light will illuminate when the auto shut-off system has been reset. Allow time for the iron to re-heat. The amber temperature indicator light will go out when the iron is ready for use. Fi