Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle HU4801/01

Fabricant : Philips
Taille : 3 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


The control knob stays at the chosen speed. When you refill water, the humidifier will resume work at the chosen speed. Note ••It is normal to find some water left in the tank. Refill water Water level can be observed through the transparent water tank window. 1 Switch off the humidifier and unplug it. OFFHIGH LOW English EN 2 Remove the upper unit by holding it at both sides. 3 You can observe the water level through the transparent water tank window. Fill the water tank with cold tap water until the water reaches the maximum water indication level. MAX Note ••When filling water, do not exceed the maximum water level, or water might leak from the drain hole and air inlets. ••Do not shake the water tank when moving it, or water might leak from the drain hole and air inlets. ••Do not fill water through the air outlets on top of the humidifier. 4 Place the upper unit back onto the water tank. EN 5 Clean your humidifier Our Philips designers have created a best- in-class design for cleanability, empowering consumers to take control of the hygiene of their humidifiers in an easy way. Cleaning humidifiers inside and out – especially the water tank and the air outlet – has never been easier. Note ••Always unplug the humidifier before you clean it. ••When pouring water from the water tank, make sure to pour water from the opposite side of the drain hole and air inlets. ••Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the humidifier. Clean the body of the humidifier Regularly clean the inside and outside of the humidifier to prevent dust from collecting. 1 Wipe away dust with a soft dry cloth from the body of the humidifier. 2 Clean the air inlet and the air outlet with a soft dry cloth. Clean the water tank Clean the water tank every week to keep it hygienic. 1 Take out the humidification filter and the filter support. 2 Fill the water tank for 1/3 with water. 3 Add some mild washing-up liquid to the water in the water tank. 4 Clean the inside of the water tank with a soft clean cloth. 5 Empty the water tank into a sink. 6 Put the humidification filter and the filter support back into the water tank. English EN 6 Clean the humidification filter Rinse the humidification filter every week and descale it every two weeks to keep it hygienic. Rinse the humidification filter and filter support 1 Switch off the humidifier and unplug it. OFFHIGH LOW 2 Remove the upper unit by holding it at both sides. 3 Take out the humidification filter and the filter support from the water tank. 4 Remove the humidification filter from the filter support. 5 Rinse the filter and the filter support under a slowly running tap. EN 6 Clean the filter support with a brush. 7 Assemble the humidification filter round the filter support. 8 Put the humidification filter and the filter support back into the water tank. 9 Put the upper unit back onto the water tank. Descale the humidification filter Note ••It is important to descale the humidifying filter to avoid scale build-up, which seriously affects the humidifying performance. ••Descale the humidifying filter every two weeks. 1 Mix white vinegar with an equal amount of tap water in a container that is large enough to soak the humidification filter in. Water : Vinegar1 : 11 hour Note ••The white vinegar is composed with of 5% acetic acid. ••If there are white deposits (scale) on the filter, make sure that the side with the white deposits is immersed in the water. English EN 2 Let the humidification filter soak in the solution for one hour. 3 Discard the water-vinegar solution. 4 Rinse the humidification filter under the tap to rinse away vinegar residues. During rinsing, turn the humidification filter so that both the front and back sides are rinsed. 5 Let excess water drip off the humidification filter. 6 Assemble the humidification filter round the filter support. 7 Put the humidification filter and the filter support back into the water tank. 8 Put the upper unit back onto the water tank. Note ••Do not squeeze or wring the filter. This might damage the filter and impact humidification performance. ••Do not dry the filter under direct sunlight, unless it is assembled back onto the filter support EN 7 Replace the humidification filter Replace the humidification filter every three months for optimal performance. If the filter is in good condition, you could use it for a longer period of time. But make sure to replace the humidification filter at least once a year. Note ••Use only Philips original humidification filter HU4102. Tip ••Register your product at for further information on how to replace your filter. 1 Switch off the humidifier and unplug it. OFFHIGH LOW 2 Remove the upper unit by holding it at both sides. 3 Take out the humidification filter and the filter support from the water tank. 4 Remove the humidification filter from the filter support. 5 Remove the packaging material from the new humidification filter...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories