Évaluations - 3, GPA: 4 ( )

Fabricant : Gaggenau Taille : 2.07 mb Nom Fichier : Langue d'enseignement:

To Operate the Single Radiant Surface Elements: 1. Place correctly sized cookware on the radiant surface element. 2. Touch and hold the P_W_ key pad until a beep sounds. The power indicator light will turn ON. Note: If no key pad is touched within 20 seconds the request to Power ON the cooktop will clear. 3. Touch and hold on/off pad for the desired element position until a beep is heard. Figure 1 The display will show " --" Note: If no further pads are touched within 10 seconds the request to power the element ON will clear. 4. Touch HI pad once to turn ON the power level to HI (See Figure 3). Touch Lo pad once for Lo. Figure 2 5. Each touch of the HI _V ) pad will decrease or increase the power level from 9,5 through 3,0 by .5 increments. Simmer power levels between 3,0 and 1,2 will decrease or increase by .2 increments. Lo is the % A)Hi lowest power level available. Note: The power level may be adjusted at any '%, time while the element is ON. 6. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each surface element provides a constant Lo amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area. 7. When cooking has been completed touch the On/OfQ pad once to turn the element OFF and if no other surface element is used touch the P_WE'E'E_ Figure 3 key pad to turn off the cooktop. Note: The HE (hot element) message will remain ON if the cooktop is still hot and will remain ON until the heating surface area has cooled Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently. Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when itis in use. These items could melt or ignite. Pothold ers, towels or wood en spoons could catch fire if placed too close to the surface elements. Do not allow aluminum foil, or ANY material that can melt to make contact with the ceramic glass cooktop. If these items melt on the cooktop they will damage the ceramic cooktop. 10 Setting Surface Controls (cont'd) Operating the DUAL Surface Element The cooktops are equipped with a DUAL radiant surface element located at the right front cooktop position (Figures t & 2). indicator lights on the control panel at that position are used to indicate what portions of the dual radiant element will heat. The INNER light indicates that only the inner element will heat. The OUTER light indicates that both inner and outer Figure 1 Figure 2 elements will heat together. You may switch between these • 0 Outer 0 _ Outer different settings at any time during cooking. To ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :