Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle CA323350X/01

Fabricant : Bosch
Taille : 337.38 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


g. fish fingers 200-300 g A 6- 7 8-12 mins Pancakes A 6- 7 continuous frying * Continue cooking without a lid ** Without lid Tips for the electronic boil start control ¦ Add only approximately 3 cups of water to the food for large hotplates and approximately 2 cups of water for small Electronic boil start control is designed to conserve food's hotplates. nutritional value while using little water for cooking. ¦ Place a lid on the saucepan. ¦ Electronic boil start control is not suitable for food that is cooked in a large volume of water ( e.g. pasta) . Childproof lock You can use the childproof lock to prevent children from switching on the hotplates. Switching the childproof lock on and off The hob must be switched off. To switch on: touch the .symbol for approx. 4 seconds. The @ symbol lights up for 10 seconds. The hob is locked. To switch off: touch the @ symbol for approx. 4 seconds. The hob is unlocked. Automatic childproof lock This function automatically activates the childproof lock every time you switch the hob off. Switching on and off You can find out how to switch the automatic childproof lock on and off in the Basic settings section. Automatic time limit If a hotplate is in use for a long time without the setting being The display goes out when you touch any control. You can changed, the automatic time limit is activated. make new settings. The hotplate stops heating. ” and ‰ flash alternately in the When the time limit is activated depends on the heat setting hotplate indicator. selected ( 1 to 10 hours) . Basic settings Your appliance has various basic settings. You can adapt these settings to your needs. Indicator Function ™ ‚ Automatic childproof lock ‹ Switched off. * ‚ Switched on. ™ . Audible signal ‹ Confirmation signal and operation error signal switched off. ‚ Only operation error signal switched on. . Confirmation signal and operation error signal switched on. * ™ . Activation of the filament circuits ‹ Switched off. ‚ Switched on. . Last setting before the hotplate was switched off. * ™ ‹ Reset to basic setting ‹ Switched off. ‚ Switched on. *Basic setting Changing the basic settings The hob must be switched off. 1. Switch on the hob. 2. Within the next 10 seconds, touch the . symbol for 4seconds. ™ and ‚ flash alternately in the left-hand display; ‹ lights up in the right-hand display. 3. Touch the .symbol repeatedly until the desired symbol appears on the left-hand display. 4. Touch the + symbol repeatedly until the desired setting appears in the display. 5. Touch the . symbol for 4 seconds. The setting is activated. Switching off To exit the basic setting, switch off the hob with the main switch and make new settings. Cleaning and care The information in this section provides help on how best to care for your hob. Suitable maintenance and cleaning products can be purchased from the after- sales service or in our e-Shop. Ceramic Clean the hob after each use. This will prevent spills from burning onto the ceramic. Only clean the hob when it has cooled down sufficiently. Use only cleaning agents which are suitable for ceramic. Follow the cleaning instructions on the packaging. Never use: ¦ Undiluted washing- up liquid ¦ Detergent intended for dishwashers ¦ Scouring agents ¦ Harsh cleaning agents such as oven spray or stain remover ¦ Abrasive sponges ¦ High-pressure cleaners or steam jet cleaners Ground-in dirt can be best removed with a glass scraper, available from retailers. Please note the manufacturer's instructions. You can also obtain a suitable glass scraper from our after- sales service or from the e-Shop. Hob surround To prevent damage to the hob surround, please observe the following instructions: ¦ Use only warm, soapy water. ¦ Do not use harsh or abrasive agents. ¦ Do not use the glass scraper. Rectifying faults Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Indicator Fault Action Blank There is no power supply. Check the household fuse for the appliance. Check whether there is a power cut by trying other electronic appliances. “ is flash- The controls are damp or an object is Dry the controls or remove the object. ing resting on them. “§ + Electronic fault. Switch the appliance off and back on again after about 30 seconds using number either the household fuse or the circuit breaker in the fuse box. Contact the after-sales service if this appears in the display again. ” . The electronics have overheated and Wait until the electronics have cooled down sufficiently. Then touch a contro...

Ce manuel est également adapté pour les modèles :
Hobs - CA323350X/02 (337.38 kb)
Hobs - CA333350X/01 (337.38 kb)
Hobs - CA333350X/02 (337.38 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories