Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
They lengthen cooking times and increase energy consumption. Do not place receptacles on burners off centre. They could tip over. Do not use wide-based receptacles on the burners nearest to the controls. When centred on the burner, they could touch the controls or raise the temperature in the area. This may damage the hob. Do not place receptacles directly on top of burners. Do not use excessive weights or strike the hob with heavy objects. Always use suitably sized receptacles on each burner. This helps avoid excessive gas consumption and prevents receptacles from getting tarnished. Always use lids. Only use thick-,flat-based saucepans, frying pans and casseroles. Always place receptacles in the middle of burners. Always place receptacle on the pans support. Make sure that the metal grids and the tops of the burners are correctly positioned before using them. Handle receptacles on the hob with care. Only use one recipient per burner. Use the extra metal grid on the burner with three flames. 9 10 Troubleshooting It is not always necessary to call the Service Centre. In some cases, you may be able to solve the problem yourself. This table contains some useful information. Important information: Only authorised personnel from our Service Centre are qualified to work on the main gas and electric systems. What.s wrong Possible cause Solution ...if none of the electrical -Faulty fuse. -Check the fuse in the system works? -The automatic circuit breaker or mains differential has been triggered. main fuse box and replace it if it is faulty -Check to see if the circuit breaker or a differential has been triggered in the mains supply box ...if the electric ignition system -There may be food or cleaning -The gap between the spark does not work? product particles between the spark plugs and the burners. -The burners are wet. -The covers on the burners are not in the right position. -Dry the burner covers and spark plugs carefully. -Check that the covers have been put in the proper position. plug and the burner needs to be cleaned carefully. ...if the flame on the burners is -The burner components have -Put the components in their not evenly distributed? not been assembled properly. -The gas outlets on the burners are dirty. correct positions. -Clean the gas outlets on the burners. ...if the gas flow does not seem normal or there is no gas flow at all? -The gas flow has been cut at an intermediate stopcock. -If the gas is supplied from a gas bottle, it may be empty. - Open any intermediate stopcocks. -Replace the gas bottle with a full one. ...if the kitchen smells of gas? -One of the valves has been left open. -Possible leak on the gas bottle coupling. -Check to see if a valve has been left open. -Check that the coupling on the gas bottle is in order. ...if the safety devices on the -The control knob has not been -Once ignited, keep the different burners do not work? kept pressed in for long enough. -The outlets on the burners are dirty. control knob pressed...
Ce manuel est également adapté pour les modèles :Hobs - EC775QB20E/01 (6.57 mb)
Hobs - EC775QB20E/03 (6.57 mb)
Hobs - EC775SB20D/01 (6.57 mb)
Hobs - EC775SB20D/03 (6.57 mb)