Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle EF845EC11/01

Fabricant : Bosch
Taille : 200.44 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
Hobs - EF845EC11/01 (453.74 kb)ruplhucs
Hobs - EF845EC11/01 (371.66 kb)itfrdenl
Hobs - EF845EC11/01 (455.31 kb)trespt

Facilité d'utilisation


nutritional value while using little water for cooking. ¦ Place a lid on the saucepan. ¦ Electronic boil start control is not suitable for food that is cooked in a large volume of water (e.g. pasta). Childproof lock and pause function ¦ You can use the childproof lock to prevent children from switching on the hotplates. ¦ The pause function allows you to interrupt the heating process. Caution! Water used for cleaning, spilt food and objects placed on the @ symbol can cause the childproof lock/pause function to be unintentionally activated or deactivated. Childproof lock Locking the hob All hotplates must be switched off. Touch the @ symbol until the indicator lamp above the symbol lights up. This takes about 4 seconds. The indicator lamp goes out after about 10 seconds. Releasing the lock Touch the @ symbol until the indicator lamp goes out. This takes about 4 seconds. The hob is unlocked. Locked hob If you set a hotplate on a locked hob, the following occurs: ¦ ‹ flashes in the hotplate indicator, or the residual heat indicator alternates with ‹ . ¦ The indicator lamp above the @ symbol lights up. Switch the hotplate off. Release the lock. Note: The residual heat is displayed, even when the hob is locked. Shortening the switch-on time You can shorten the switch-on time of the childproof lock from 4 seconds to 1 second: The hotplates must be switched off. 1. Set all 4 hotplates to heat setting 2. 2. Switch off the hotplates one after the other from right to left. 3. Select a heat setting for any hotplate and press the hotplate control. 4. Switch off the hotplate control. All displays light up briefly. The switch-on time is shortened. You can also increase the switch-on time to 4 seconds again. Proceed in exactly the same way as for shortening it. Pause function Continuing cooking Tap the @ symbol again within 3 minutes. The hotplates Activating the pause function continue to heat. Tap the @ symbol. The selected heat setting flashes on the hotplate indicator. Heating is interrupted. Pause time exceeded After 3 minutes, a ‹ flashes in the display. Switch the hotplate off and make your settings again. Automatic time limit If a hotplate is in use for a long time without the setting being When the time limit is activated depends on the heat setting changed, the automatic time limit is activated. selected (1 to 10 hours) . The hotplate stops heating. ‹ flashes in the hotplate indicator. Note: You can switch the hotplate back on again at any time. Switch the hotplate off. Cleaning and care The information in this section provides help on how best to care for your hob. Suitable maintenance and cleaning products can be purchased from the after- sales service or in our e-Shop. Ceramic Clean the hob after each use. This will prevent spills from burning onto the ceramic. Only clean the hob when it has cooled down sufficiently. Use only cleaning agents which are suitable for ceramic. Follow the cleaning instructions on the packaging. Never use: ¦ Undiluted washing- up liquid ¦ Detergent intended for dishwashers ¦ Scouring agents ¦ Harsh cleaning agents such as oven spray or stain remover ¦ Abrasive sponges ¦ High- pressure cleaners or steam jet cleaners Ground- in dirt can be best removed with a glass scraper, available from retailers. Please note the manufacturer's instructions. You can also obtain a suitable glass scraper from our after- sales service or from the e-Shop. Hob surround To prevent damage to the hob surround, please observe the following instructions: ¦ Use only warm, soapy water. ¦ Do not use harsh or abrasive agents. ¦ Do not use the glass scraper. Rectifying faults Malfunctions often have simple explanations. Please read the following notes before calling the after- sales service. Indicator Fault Action Blank There is no power supply. Check the household fuse for the appliance. Check whether there is a power cut by trying other electronic appliances. ‹ is flashing Automatic time limit activated. Switch the hotplate off. Make your new settings. “ is flashing The controls are damp or an object is Dry the controls or remove the object. resting on them. ” ‹ Display faulty. Switch the appliance off and back on again after about 30 seconds using either the household fuse or the circuit breaker in the fuse box. Contact the after- sales service if this appears in the display again. ”… , all hotplates Childproof lock faulty. Switch the appliance off and back on again after about 30 seconds are switched off. using either the household fuse or the circuit breaker in the fuse box. Contact the after- sales service if this appears on the display again. You can still cook with a faulty childproof lock. After- sales service Our after- sales service is there for you if your appliance should need to be repaired. We are committed fo find the best solution also in order to avoid an unnecessary call- out. E number and FD number: Please quote the E number (product number) and the FD number (production number) of your applia...

Ce manuel est également adapté pour les modèles :
Hobs - EF845EC11/02 (200.44 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories