Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Pans made from materials which help diffuse heat, such as stainless steel sandwich pans, distribute heat uniformly, saving time and energy. Absence of pan or unsuitable size If no pan is placed on the selected hotplate, or if it is made of unsuitable material or is not the correct size, the power level displayed on the hotplate indicator will flash. Place a suitable pan on the hotplate to stop the flashing. If this takes more than 90 seconds, the hotplate will switch off automatically. Empty pans or those with a thin base pan and switch the hotplate off. If it fails to work after it has cooled down, please contact the Technical Assistance Service. Do not heat empty pans, nor use pans with a thin base. The hob is equipped with an internal safety system. However, an Pan detection empty pan may heat up so quickly that the "automatic switch off" function may not have time to react and the pan may reach Each hotplate has a minimum limit for detecting pans, which very high temperatures. The base of the pan could melt and varies depending on the material of the pan being used. You damage the glass on the hob. In this case, do not touch the should therefore use the hotplate that is most suitable for the diameter of your pan. Familiarise yourself with the appliance These instructions for use are applicable to other hobs. On page 2 an overview of the models is provided, along with information on measurements. The control panel Control sur- Function faces # Main switch ° Select the hotplate A/ @ Select power level 0 Time program @ Childproof lock Indicators ‚ - S Power levels • Residual heat Indicators ‹ ‹ Time program function x Cooking time › Powerboost function Control surfaces Pressing a symbol activates its corresponding function. Notes ¦ The settings will not change if several symbols are pressed at the same time. This enables the programming zone to be cleaned when food is spilt. ¦ Always keep the control surfaces dry. Moisture can affect proper functioning. The hotplates Hotplate Turning on and off $ Single hotplate Always use cookware of a suitable size. . Broiler This zone is switched on automatically when using cookware with a base the same size as the outer zone. Use only cookware suitable for induction cooking; see the section on suitable cookware. Residual heat indicator The hob has a residual heat indicator • on each hotplate, which lights up when they are hot. Avoid touching them when this indicator is lit. The • light will remain on while the hotplate is hot, even after the hob has been turned off. If the pan is removed before the hotplate is switched off, the • will appear and alternate with the selected power level. Programming the hob This section will show you how to program the hotplates. The table contains power levels and cooking times for several dishes. Switching the hotplate on and off The range is turned on and off using the main switch. To switch on: press the# symbol. The indicator next to the main switch and the ‹ indicators light up. The hotplate is ready for use. To switch off: press the # symbol until the indicators go out. All hotplates are turned off. The residual heat indicator will remain lit until the hotplates have cooled down. Note: The range switches off automatically when all the hotplates have been turned off for more than 20 seconds. Set the hotplate Select the required power level with the + and - symbols. Power level 1 = minimum power. Power level 9 = maximum power. Each power level has an intermediate setting. This is marked with a dot. Cooking guidelines table The table below contains some examples. Cooking times depend on the power level, type, weight and quality of the food. As such they are approximate. Power levels affect cooking results. Setting the power level The hob must be switched on. 1. Press the ° symbol several times until the ‹ indicator of the required hotplate lights up. 2. In the following 5 seconds, press the + or - symbol. The default setting appears: + symbol = power level 1 - symbol = power level 9 . . 3. To change the power level: select the hotplate and press the + or - symbol until the required power level appears. To switch off the hotplate Select the hotplate and then press the + or - symbol until ‹ symbol appears. The hotplate turns off and the residual heat indicator appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. After a certain time, the hotplate switches off. When heating purees, creams and thick sauces, stir occasionally. Use power level 9 to begin cooking. Power level Cooking time ( minutes) Melt Chocolate, chocolate coating, butter, honey 1-1. - Gelatine 1-1. - Heating and keeping warm Stew ( e.g., lentils) 1-2 - Milk* * 1. -2. - Sausages heated in water* * 3-4 - Defrosting and heating Frozen spinach Frozen goulash 2. -3. 2. -3. 5-15 min 20-30 min Slow cooking, simmering Potato dumplings 4. -5. * 20-30 min Fish 4-5* 10-15 min White sauces (e. g., bechamel) 1-2 3-6 min Whipped sauce...
Ce manuel est également adapté pour les modèles :Hobs - VVK26I8471/20 (788.62 kb)