Évaluations - , GPA: ( )

Instructions Bosch, Modèle 3ETG394NP/01

Fabricant : Bosch
Taille : 452.13 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

Hobs - 3ETG394NP/01 (534.48 kb)

Hobs - 3ETG394NP/01 (534.57 kb)

Hobs - 3ETG394NP/01 (447.54 kb)

Melted sugar, or foods which contain a lot of sugar which may have spilt, should be cleaned off the hotplate immediately, using the glass scraper. Trouble shooting Sometimes certain faults detected can be easily resolved. Before calling the Technical Assistance Service, bear in mind the following advice: Fault Possible cause Solution The general electrical sys-Defective fuse. Check the fuse in the main fuse box and change it tem is malfunctioning. if it is damaged. The automatic safety switch or circuit breaker has Check the main control panel to see if the auto- tripped. matic safety switch or circuit breaker has tripped. The automatic switching There may be food or cleaning products stuck The space between the ignition sparker and the on function does not work. between the ignition sparkers and the burners. burner must be clean. The burners are wet. Dry the burner caps carefully. The burner caps are not correctly positioned. Check that the burner caps are correctly positioned. The appliance is not earthed, is poorly connected Contact the installation technician. or the earthing is faulty. The burner flame is not uni-The burner components are not correctly posi-Correctly place the parts on the appropriate form. tioned. burner. The grooves on the burner are dirty. Clean the grooves on the burner. 14 Fault Possible cause Solution The gas flow is not normal or there is no gas. The gas supply is blocked by gas taps. If the gas is supplied from a gas cylinder, check that it is not empty. Open all gas taps. Change the gas cylinder. The kitchen smells of gas. A gas tap has been left on. Turn off the taps. Incorrect coupling of gas cylinder. Check that the coupling is sound. Possible gas leak. Shut off the gas supply, ventilate the premises and immediately notify an authorised installation technician to check and certify the installation. Do not use the appliance until ensuring that there is no gas leak in the installation or appliance itself. The burner immediately switches off after releasing the control knob. The control knob was not held down for long enough. The grooves on the burner are dirty. Once the burner is on, hold the control knob down a few seconds longer. Clean the grooves on the burner. Technical Assistance Service When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specifications plate located on the lower section of the hob and on the label in the user manual. After-sales contact details for all countries can be found in the attached after-sales service directory. Warranty conditions In the unlikely event that the appliance is damaged or does not meet your expectations in terms of quality, please inform us as soon as possible. For the warranty to be valid, the appliance must not have been tampered with, or used inappropriately. The applicable warranty conditions are those set out by the company's representative office i...