An isolating device is to be provided on the fixed wiring side. Switches with a contact opening of more than 3mm apply as isolating devices. These include-automatic cut-out switches, fuses and contactors (VDE 0730, s. 7, Parti). 6 Your appliance must be connected to fixed wiring via the use of a double pole swiched fused spur outlet with or without pilot lamp. We strongly recommend the appliance is connected by a qualified electrician who is a member of the NICEIC who will comply with the I

The hob must be installed by qualified personnel to the relevant British Standards. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. WHEN THE HOB IS FIRST INSTALLED Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory. Operation ELECTRIC HOTPLATES i i To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control kn

No propane tank. Just plug in - that's all. This appliance is also great for camping, boating, and college dorms. With its easy to use control dials, this appliance will be a great addition to any kitchen. Keystone Manufacturing Company, Inc. • P.O. Box 863 • Buffalo, NY 14240 • 716.875.6680 or 1.800.DENI.VAC (1.800.336.4822) • Fax: 716.875.6969 • ©2008 Keystone Manufacturing Company, Inc.

It is important that you become familiar with the functions and features of the Hob. You should therefore read these operating instructions as they will help you get the most out of your new Hob. Pay extra attention to sections marked . These are warning texts to help you avoid accidents. Keep the operating instructions. They will come in handy if there is something you are not sure about, and should accompany the Hob if it is transferred to a new owner. The structure of the operating instructio

Ensure that all the control knobs are in the OFF position when not in use. Do not use the appliance if it is damaged in any way. If a fault or crack becomes visible, disconnect the appliance immediately from the electricity supply and contact your local AEG Service Force Centre. Never use plastic or aluminium dishes on the appliance. Child Safety Young children must not be allowed to tamper with the appliance or play with the controls. The appliance gets hot when it is in use. Children should be

• Failure to observe these basic rules will drastically reduce the performance and increase the noise levels of the extractor hood. Introduction Extractor version • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one activated carbon filter (special accessory). • You will need original AEG carbon filter for this function (see Special Accessories). • The air is discharged to the outside through a pipe, which must be fitted to connection flange A

(Fixed connection of the appliance must only be carried out by an authorised electrician.) Wall unit mounting - Fig. 6 • Only for extractor version: position the upper section of the chimney so that the oulet slots H are not visible (see also A-B-C sequence on on Fig. 6). • Fix each other both parts of the hood (1), make all connections between the two parts (2) and fix with 6 screws (3). • Sign the wall with a center line, this will aid mounting procedure (4), position the template so that the

220 mm. table). Also, as soon as a liquid Medium (semi-rapid) 120 mm. 200 mm. comes to the boil take care to turn Small (Auxiliary) 80 mm. 160 mm. the flame down to a level that will Triple Flame 220 mm. 260 mm. just keep it boiling. When cooking with fats or oils, do not leave the pan unattenced because these substances may catch fire if brought to high temperatures. If the control knobs become difficult to turn, please contact your local Service Force Centre. Before any maintenance or cleaning

The air outlet must under no circumstances be connected to ventilation ducts for rooms in which fuel-burning appliances are installed. • It is advisable to apply for authorization from the relevant controlling authority when connecting the outlet to an unused chimney flue or combustion gas duct. The air outlet installation must comply with the regulations laid down by the relevant authorities. • When the unit is used in its extractor version, a sufficiently large ventilation hole must be provide

6). • Insert the frame, that holds controls, grease filter and lamps, in the motor housing using proper rails and fix each other with two 3x9 screws (12- 3). • Sign the wall with a center line, this will aid mounting procedure (4), position the template so that the mid line printed on the template matches with the center line previously signed, the lower side of the template corresponds to the lower side of the hood once mounted (5). • Drill two holes O 8mm and fix the support bracket with two w