7208330100REV00 CONTENTS PAGE 1 Important Instructions PAGE 2 Model and Serial Number Information PAGE 3 Stove Installation PAGE 3 Operation PAGE 4 Maintenance PAGE 7 Warranty QUICK REFERENCE GUIDE FOR THE ELECTRIC STOVE 1. Prior to the first use of the Stove verify the following: • Are the circuit breakers for the unit on? • Are the light bulbs in your Stove loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual) 2. The heater on you

7207940100REV00 CONTENTS PAGE 1 Important Instructions PAGE 2 Model and Serial Number Information PAGE 3 Stove Installation PAGE 3 Operation PAGE 5 Maintenance PAGE 7 Warranty QUICK REFERENCE GUIDE FOR THE ELECTRIC STOVE 1. Prior to the first use of the Stove verify the following: • Are the circuit breakers for the unit on? • Are the light bulbs in your Stove loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual) 2. The information r

STOVE SURFACE CLEANING Use warm water only to clean painted surfaces of the Compact Stove. Do not use abrasive cleaners. SERVICING Except for light bulb replacement and cleaning described above, an authorized service representative should perform any other servicing. 6 SCREWS SCREWS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE ONE YEAR LIMITED WARRANTY Products to which this limited warranty applies This limited warranty applies to the following models of your newl

Model Number Serial Number Model Number Label Serial Number Label Model Number Label Serial Number Label IMPORTANT INSTRUCTIONS If you have any questions about our products please have the product model and serial numbers available upon calling Dimplex customer service. To locate the model and serial number labels see below. Record the Model Number, Serial Number, and CAT number on the front cover of this manual for future reference. 2 NOTE A 15amp, 120 volt circuit is required. A dedicated circ

The heater element may or may not be on, depending on the thermostat control setting (SEE “HEATER THERMOSTAT CONTROL”). RESETTING THE TEMPERATURE CUTOFF SWITCH Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on. CAUTION If you need to continuously reset the heater, unplug the unit and call Dimplex North America