Log:
Téléchargements : 4   Taille : 284 kb   Fabricant : Dacor  
Catégorie : Hobs
@name

102 D Cooker Hood Installation and Operating Instructions Contents Drawings.............................................................................3-4 General...................................................................................5 Notes prior to installation....................................................6 Electrical connection............................................................6 Preparation for installation..................................................9

Téléchargements : 0   Taille : 284 kb   Fabricant : Bosch  
Catégorie : Hobs
@name

An isolating device is to be provided on the fixed wiring side. Switches with a contact opening of more than 3mm apply as isolating devices. These include-automatic cut-out switches, fuses and contactors (VDE 0730, s. 7, Parti). 6 Your appliance must be connected to fixed wiring via the use of a double pole swiched fused spur outlet with or without pilot lamp. We strongly recommend the appliance is connected by a qualified electrician who is a member of the NICEIC who will comply with the I

Téléchargements : 0   Taille : 284 kb   Fabricant : AEG  
Catégorie : Hobs
@name

The return air slots on the upper side of the appliance are to be sealed e.g. with self-adhesive aluminium foil. See also for exhaust air operation installation. Extraction Mode Important Recirculation Mode Installation Fixing to the cabinet Fixing to the wall Make holes at the bottom of the cabinet using the template supplied. Fit the four 4,2 x 35 screws supplied from inside the cabinet into the holes on the appliance (Fig. 5). — Offer the template to the wall — Make 4 x 8mm 0 holes

Téléchargements : 8   Taille : 284 kb   Fabricant : DCS  
Catégorie : Hobs
@name

2). Lever F in position A (Fig. 3). In the extraction mode the outlet venting hose must be 100mm in diameter. If the venting hose runs horizontal it must be slightly slanted upwards (about 10°) to ensure the air is vented easily from the kitchen to the outside. If the hood is to vent out into the open air through an external wall, you need a telescopic wall box (optional extra). Wall box and venting hoses are available via your AEG Stockist or AEG Spare Parts. Flame retardant venting hose is

Téléchargements : 0   Taille : 2 mb   Fabricant : Cannon  
Catégorie : Hobs
@name

4. Leave the pan for at least 60 minutes before moving it. The Cooking Modes in your Cooker (2nd OVEN) NOTE: A temperature value can be set for all cooking modes between 50°C and Max, except for the following modes • MAXI-GRILL / MINI-GRILL (recommended: set only to MAX power level) Starting the oven 1. Select the desired cooking mode by turning the SELECTOR knob. 2. Select the recommended temperature for the cooking mode or the desired temperature by turning the THERMOSTAT knob. A list detailin

Téléchargements : 0   Taille : 97 kb   Fabricant : Dacor  
Catégorie : Hobs
@name

If you need assistance, contact our Customer Care Department on 01635 572700 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Remove all packaging before using the hob. . Ensure that the electrical supply complies with the type stated on the rating plate. . Do not attempt to modify the hob in any way. Child Safety . This hob is designed to be operated by adults. Do not allow children to play ne

Téléchargements : 0   Taille : 97 kb   Fabricant : Bosch  
Catégorie : Hobs
@name

The hob must be installed by qualified personnel to the relevant British Standards. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. WHEN THE HOB IS FIRST INSTALLED Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory. Operation ELECTRIC HOTPLATES i i To switch on a hotplate, turn the relevant control knob anticlockwise to the required heat setting. The control kn

Téléchargements : 6   Taille : 97 kb   Fabricant : AEG  
Catégorie : Hobs
@name

If you need assistance, contact our Customer Care Department on 01635 572700 Installation . This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. . Remove all packaging before using the hob. . Ensure that the electrical supply complies with the type stated on the rating plate. . Do not attempt to modify the hob in any way. Child Safety . This hob is designed to be operated by adults. Do not allow children to play ne

Téléchargements : 6   Taille : 97 kb   Fabricant : DCS  
Catégorie : Hobs
@name

A minimum distance of 100 mm. must be left between the side edges of the hob and any adjacent cabinets or walls. The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 420 mm. If it is fitted below 420 mm. a space of 50 mm. must be allowed from the edges of the hob. The minimum distance combustible material can be fitted directly above the hob is 700 mm. 650 mm 420 mm 420 mm 100 mm 50 mm 50 mm 55 mm 600 mm 700 mm 420 mm 100 mm 420 mm50 mm 55 mm

Téléchargements : 4   Taille : 82 kb   Fabricant : Glen Dimplex Home Appliances Ltd  
Catégorie : Hobs
@name

Any overhanging surface or cooker hood should be at least 450mm (18”) above the cooker hob. We do not recommend positioning the cooker below wall cupboards, as the heat and steam from the cooker may cause damage to the cupboards and its contents. Make sure that the walls near the cooker are resistant to heat, steam, and condensation. 2 Installing Your Cooker Connecting the cooker Warning! WARNING -THIS APPLIANCE MUST BE EARTHED The Baby Belling 121R is designed to operate from a 13A socket outle





catégories