Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
> The following software license agreement appears. 4 Click on 'Yes' to continue the installation. Installation EN > The following screen, including a progress bar, appears. > The following screen appears when the installation was successful. 5 Click on 'Finish'. 6 Restart your PC / laptop when you have finished installing the software. > The V(ideo)-Lounge desktop shortcut will be installed after installation. > Via VLounge you have access to all camera-related software. See ‘Using the applications’. 7 You can now connect your WebCam. EN Installation Connecting the WebCam to your PC / laptop General 1 Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop. 2 Turn on the PC / laptop. 3 Connect the USB connector of the USB cable to the USB port of the PC / laptop. > The WebCam will now derive its power from the PC / laptop. 4 Use the clamp and the two rubber rims to attach the WebCam to your PC monitor or laptop screen. SPC500NC WebCam 5 3 3 5 4 4 6 5 Peel off the protective foil on the rear of the microphone (SPC500NC only) and attach the microphone to the PC monitor or laptop screen. 6 Connect the microphone plug to the microphone or green socket of the sound card. SPC505NC WebCam 5 Connect the headset audio cable (SPC505NC only) to the sound card of your PC / laptop. • Connect the black headphone plug (n) to the headphone socket of the PC sound card. • Connect the grey microphone plug (!) to the microphone or green socket of the sound card. Installation EN 11 AUDIO OUTAUDIO IN AUDIO OUT AUDIO IN 3 3 4 4 5 5 EN WebCam settings The Philips SPC500NC/SPC505NC video proper ty can be changed from within an application, or independently by clicking the VProper ty icon which can be found in the Windows taskbar bottom right of your screen. Most applications can show a 'live preview' video image on your monitor. Always use this option to see the effect of changed settings on your screen. General controls 1 2 1 Flickerless The Flickerless option should only be used under flickering light conditions (e.g. fluorescent or neon lamps) to prevent flickering or strangely colored video images. If this option is used under normal lighting conditions the video image may be overexposed. 2 Region If you are using the Philips SPC500NC/SPC505NC in Europe, select '50 Hz' and if you are using the Philips SPC500NC/ SPC505NC in Nor th America, select '60 Hz'. For Asia this setting is dependent on the local mains output. E.g. for China, select ‘50 Hz’ and for Taiwan, select ‘60 Hz’. For Japan the setting is region dependent. Please check your local mains output to find the correct ‘Region’ setting. WebCam settings EN Picture controls 384679! @ 0# $ % ^ 5 34 Full automatic control: on/off This full automatic control mode provides a ver y easy way to get the best out of your Philips SPC500NC/SPC505NC WebCam. Or you can choose to have maximum manual control over the WebCam settings by switching the full automatic control mode off. Full automatic control 'on' is the preferred setting for normal use. Techniques active within full automatic control mode are: – Automatic exposure control and automatic white balance control, to provide the best video source signal possible; – Automatic frame rate selection for improved WebCam sensitivity in low light conditions. Frame rate You can use the scroll open menu to set the frame rate of the video you wish to capture. E.g. 30 fps means that the WebCam will capture video at 30 frames per second. EN WebCam settings 5 6 7 8 9 Auto Exposure & Exposure slider The exposure is the amount of light received by the sensor and is determined by how long the sensor is exposed to capture a snapshot or video frame. The result depends on the sensitivity of the sensor. The WebCam will find the optimal setting if you select the automatic exposure option. You can use the exposure slider if you would like to set the WebCam according to your personal preferences. Reset Press this button if you would like to reset the WebCam settings to the default factor y settings. Save Press this button if you would like to save your personal preferred settings. Restore Press this button if you would like to restore your personal preferred settings. Auto White Balance Most light sources are not 100% pure white but have a cer tain ‘color temperature’. Normally our eyes compensate for lighting conditions with different color temperatures. If the automatic white balance is selected, the WebCam will look for a reference point which represents white. It will then calculate all other colors based on this white point and compensate the other colors accordingly, just like the human eye. You can also select fixed settings for ‘Indoor’, ‘Outdoor’ and ‘Fluorescence’ conditions or use the ‘Red’ and ‘Blue’ sliders if you would like to set the WebCam according to your personal color temperature preferences. WebCam settings EN 0 Brightness Brightness enables you to adjust the brightness of the displayed image or vi...
Ce manuel est également adapté pour les modèles :Webcams - SPC500NC/00 (3.35 mb)
Webcams - SPC505NC/27 (3.35 mb)