Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Lindy, Modèle 32444

Fabricant : Lindy
Taille : 223.98 kb
Nom Fichier : 32444.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Setting the IP Address for the Camera Please record the serial number from the label on the unit. This serial number is the MAC address for the camera, for example 0002D11000520 = 00-02-D1-10-00-52. There are two ways to assign an IP address to this MAC address. 1. By using the ‘Installer.exe’ software on the CD-ROM Run the ‘Installer.exe’ first, then power on the unit. Click on the serial number that corresponds to your camera Assign a free IP address If you want to fix the IP address of the unit, check the option ‘Use this IP whenever the system boots’ Click ‘Set IP Address’ to start the installation process English Manual 2. By using the DOS command line under Windows Start a DOS Window and type the following commands: Syntax: arp –s ping Example: Type the arp command and press ‘enter’ Type the ping command and press ‘enter’ If you see the reply message, the unit has been installed successfully Viewing the Camera via a Web browser Type the IP address that you’ve assigned. The required password is the serial number (mind upper and lower cases), the login name is ‘root’ Click on the ’Configuration’ button for further adjustments Radio Frequency Energy, Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. FCC Compliance Statement (United States) This equipment has been tested and found to comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Canadian Department of Communications RFI statement This equipment does not exceed the class B limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de la classe A prescrites dans le reglement sur le brouillage radioelectriques publie par le ministere des Communications du Canada European EMC directive 89/336/EE CE statement This equipment complies with the requirement for CE mentioned in the European Directive and Standards EN55022 and EN55024. This equipment has been tested and found to comply with the limits (for a class B computing device) in accordance with the specifications in the European Standard EN55022. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception. However, there is no guarantee that harmful interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference with one or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase the separation between the equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an experienced radio / TV technician for help. LINDY No. 32444 © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (Feb -2003) Deutsches Benutzerhandbuch Einfuhrung Bitte uberprufen Sie vor Inbetriebnahme der Kamera den Inhalt der Lieferung auf Vollstandigkeit. Es mussen vorhanden sein: 1. Die Kamera 2. Das Netzteil 3. Der Kamerafu. in 2 Teilen 4. Ein Schraub/Steckverbinder 5. Dieses Manual und 6. Die Software-CD Beschreibung und Installation Sie finden an der Voderseite der Kamera die folgenden Elemente: Objektiv, Status-LED. Mikrofonoffnung. Auf der Ruckseite finden sich: der Netzteilanschluss, der I/O Terminal- Block, der Ethernet-Anschluss und das Etikett mit der Seriennummer. Um die Kamera uber einen Hub mit einem vorhandenen Netzwerk zu verbinden, verwenden Sie ein standard 1:1-Patchkabel, um sie direkt an einen Rechner anzuschliessen, ein Crossover-Patchkabel. Wenn Sie externe Komponenten (Sensoren / Alarmgeber) verwenden, schliessen Sie diese an die Kamera an wie im ausfuhrlichen Handbuch (auf der CD) beschrieben. Verbinden Sie zuletzt das externe Netzteil mit einer Steckdose und die 12V-Zuleitung mit der Kamera. Setzen der IP-Adresse Bitte notieren Sie sich die Seriennummer vom ruckseitig aufgebrachten Etikett; diese Nummer ist gleichzeitig die MAC-Adresse der Kamera, z.B. 0002D1100052 = 00-02-D1-10-00-52. Um dieser MAC-Adresse eine IP-Adresse zuzuweisen, haben Sie zwei Moglichkeiten: 1. uber die ‚Installer’-Software auf der CD: Starten Sie das Programm und verbinden...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories