Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). If you have any questions about this product, or are missing a part, please call us toll-free at 1-800-432-5437, rather than return this product to the store. We are available between 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TTD equipment, please call 1-800-382-7470. Or write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, N.Y. 14052. Age: 2-5 years Weight limit: 55 lbs (25 kg). Tough Trike Parts IMPORTANT! • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry cloth before assembly. WARNING CAUTION To avoid serious injury: • Adult supervision is required. •Never use near cars and other motor vehicles, near streets, steps, sloped drive- ways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. •Never allow more than one rider. This product contains small parts in its unassembled state. Adult assembly is required. Seat Key Frame 2 Pedals 2 Fork Covers Front Wheel Pedal Axle Fork Handlebar Back Straight Axle 2 Bushings 2 Wheel Hubs 2 Wheel Caps #8 x 21/4" Screw - 1 Note: Some parts shown are assembled to both sides of the trike. *We’ve included one extra .354" cap nut for your convenience. Note: Tighten and loosen the screws with a Phillips screwdriver. Do not over-tighten the screws. 4 Pedal Hubs #8 x 3/4" Screw - 6 2 Rear Wheels Part not shown: Label Sheet ALL SHOWN ACTUAL SIZE Handlebar Front .354" Cap Nut - 2* .354" 2 Assembly Frame Seat PUSH Key 1 • Fit the seat onto the frame. • Push firmly near the back end of the seat to "snap" it into place. •Insert and "snap" the key into the frame. Hint: You may need to tap the key with a hammer to secure it in place. Wheel Hub (Flat Side Down) Bushing (Grooved Side Down) Straight Axle Straight Axle Cap Nut Rear Wheel (Indented Side Down) 2 Straight Axle Assembly Bottom View 3 •Turn the frame upside down. •Insert the straight axle assembly through the holes in the rear of the frame. Bushing (Smooth Side First) Wheel Hub (Pointed End First) Wheel (Flat Side First) Straight Axle 4 •Turn the assembly upright. • Slide a bushing, smooth side first, onto the end of the straight axle. • Slide a wheel, flat side first, onto the end of the straight axle. • Slide a wheel hub, pointed end first, onto the end of the straight axle. • Place one end of the straight axle into the cap nut. Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle. • Slide a wheel hub, flat side down, onto the straight axle. • Slide a rear wheel, indented side down, onto the straight axle. • Slide a bushing, grooved side down, onto the straight axle. 3 Assembly 5 • Fit the cap nut on the end of the straight axle. •Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the straight axle. Hint: You may need the help of another adult to hold the other end of the straight axle in place. Wheel Hub Wheel Cap6 • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. Pedal Hub Pedal Hub Pedal Axle Tab Pedal Axle Tab 7 • While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel. Front Wheel Hole 8 • Press the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Fit the tabs on the wheel cap into the slots in the wheel hub. Push to "snap" the wheel cap in place. • Repeat this procedure to attach the other wheel cap to the other wheel hub. •Turn the front wheel assembly over. •Insert the remaining pedal hubs on top of and below the pedal axle and into the hole in the center of the front wheel. 9 • Press the pedal hubs until they are flush with the surface of the front wheel. PRINTED IN MEXICO B8776pr-0920 4 Assembly Front Wheel Assembly Scrap Block of Wood Pedal Axle Pedal 10 • Place a scrap block of wood under the front wheel assembly. • Fit a pedal on the pedal axle. Tap the pedal with a hammer until it is secure. • Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with the hammer again. • Repeat this procedure to attach the other pedal to the other end of the pedal axle. Fork Arms Pedal Axle Groove Fork Cover Front Wheel Assembly 11 • Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. •Insert two #8 x 3/4" screws into the fork cover and tighten. • Repeat this procedure to attach the other fork cover to the other fork arm. Fork Post Fork Cover REAR OF TRIKE 12 • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that ...