Log:
Évaluations - 3, GPA: 3.3 ( )

Instructions Emerson, Modèle CF2455ORB00

Fabricant : Emerson
Taille : 277.5 kb
Nom Fichier : 2a63abca-09e0-48a6-9fc8-ac5483253576.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


54” Ceiling Fan Owner's Manual Part No. F40BP73370000 Form No. BP7337 U.L. Model No.: CF2455 WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing. 4. Do not put anything into the fan blades while they are turning. 5. Do not operate reversing switch until fan blades have come to a complete stop. Additional Safety Instructions for Installation 1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades. 2. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999” and Local Electrical Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed electrician. 3. The outlet box and joist must be securely mounted an capable of reliably supporting a least 50 pounds. Use only U.L. outlet boxes listed as “Acceptable for Fan Support”, and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt. 4. The downrod furnished with the fan proves the minimum recommended floor-to-fan blade clearance for an 8 foot ceiling. 5. The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with th fan blades. 6. Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not know enough about electrical wiring, have your fan installed by a licensed electrician. NOTE: This fan is suitable for use with solid-state speed controls. WARNING: To reduce the risk of fire or electrical shock, this fan should only be used with fan speed control, Model No. SW105, manufactured by Rhine Electric Co., Ltd. WARNING: This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson could result in personal injury or property damage. WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades. WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/switch. DATE CODE: The date code of this fan may be found on the box, stamped in ink on a white label. You should record this data above and keep it in a safe place for future use. 2 This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly One six-inch blade screwdriver One stepladder Installed Wire Length Wire Size A.W.G. One Phillips head screwdriver One wire stripper Up to 50 ft. 14 Seven wire connectors (supplied) 50-100 ft. 12 Three 40-watt (max.) candelabra base bulbs (uplight) Three 60-watt (max.) candelabra base bulbs (lower light) MATERIALS WARNING ! If you feel you do not have enough wiring knowledge or Wiring outlet box and box connectors must be of type experience, have your fan installed by a licensed required by the local code. The minimum wire would electrician. be a 3-conductor (2-wire with ground) of the wire size, to right: Unpacking Instructions For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted. WARNING ! Do not install or use fan if any part is damaged or missing. Call Toll-Free: 1-800-654-3545 WARNING ! This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. 1. Open styrofoam unit containing fan. Remove upper and center sections of styrofoam unit. Remove parts and check to see that you have received the following: a. One fan motor and housing assembly b. One motor coupling cover c. ...

Ce manuel est également adapté pour les modèles :
Ventilateurs - CF2455PW00 (277.5 kb)
Ventilateurs - CF2455BS00 (277.5 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories