Évaluations - , GPA: ( )

Instructions Rangemaster, Modèle L1 512 692

Fabricant : Rangemaster
Taille : 1.25 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

T1 0/1 Motor on First speed. When pressed for about 2 seconds the motor is switched off. T2 Speed on Second speed. T3 Speed on Third speed. T4 Speed Fixed Max. speed Flashing Intensive speed. Suitable for the strongest cooking vapours and odours. The function becomes active when the button is pushed for about 2 seconds. After 10 minutes of functioning it turns off automatically. This function can be interrupted by means of pressing any of the buttons. S1 Led Fixed Indicates that the Metal grease filters saturation alarm has been triggered, and the filters need to be washed. The alarm is triggered after 100 working hours. (Reset; check the Maintenance-paragraph) Flashing indicates that the activated charcoal odour fi lter saturation alarm has been triggered, and the filter has to be replaced; the metal grease filters must also be washed. The activated charcoal odour filter is triggered after 200 working hours. (Activation and Reset; check the Maintenance-paragraph) GB 16 REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type. • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the proper manner. MAINTENANCE Grease filters CLEANING METAL GREASE FILTERS Alarm signal reset • Switch of the lights and extractor motor. • Press button T3 for at least 3 seconds, until the leds start to flash. Cleaning the filters • The filters are washable and must be cleaned when led S1 flashes or at least every 2 months of operation, or more frequently for particularly heavy usage. • Remove the filters one at a time, supporting them with one hand and turning the safety knobs (pull and turn). • Wash the filters, taking care not to bend them. Allow them to dry before refitting. • Replace them and fix them using the safety knobs provided (pull and turn). GB 17 GB 18 Activated charcoal fi lter (Recirculation version) REPLACING THE ACTIVATED CHARCOAL FILTER • The fi lter is not washable and cannot be regenerated. It must be replaced when led S1 fl ashes or at least every 4 months. The alarm signal will only light up when the extractor motor is switched on. Alarm signal reset • Switch off the lights and extractor motor. • Press button T3 for at least 3 seconds, until the leds start to fl ash. Replacing the Filter • Remove the grease fi lters. • Remove the saturated activated charcoal fi lters as shown (A). • Fit new fi lters (B). • Replace the grease fi lters. Alarm signal activation • In Recirculation version Hoods, the Filter saturation alarm can be enabled on installation or at a later date. • Turn the Lights and the suction Motor off. • Disconnect the Hood using the Main switch or the double-pole switch on the mains power supply. • Restore the connection by pressing and holding T1. • Release the button. All fi ve LEDs are turned on • Within 3 seconds press T1 until LEDs T1 and T4 fl ash in confi rmation: LED fl ashes twic...