Évaluations - 3, GPA: 4.7 ( )

Fabricant : Emerson Taille : 203.29 kb Nom Fichier : Langue d'enseignement:

. #8 Washerhead, (4) — — — — — — — — — — — 29 Washer, 9/16” — — — — — — — — — — — — Owner's Manual BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 BP7234-3 *Contact your nearest ! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose switch wire connections in the switch housing. 3. Reversing switch in neutral position. 1. Check main and branch circuit fuses or circuit breakers. 2. Check line wire connections to fan and switch wire connections in the switch housing. WARNING: Make sure main power is turned off. 3. Make sure reversing switch position is all the way to one side. ! 2. Fan sounds noisy. 1. Blades not attached to fan. 2. Loose screws in motor housing. 3. Screws securing fan blade flanges to motor hub are loose. 4. Switch housing binding against blade hub. 5. Wire connectors inside switch housing rattling. 6. Screws holding blades to flanges are loose. 1. Attach blades to fan before operating. 2. Check to make sure all screws in motor housing are snug (not over-tight). 3. Check to make sure the screws which attach the fan flanges to the motor hub are tight. 4. Check to make sure that the switch housing does not bind against the blade hub. 5. Check to make sure wire connectors in switch housing are not rattling against each other or against the interior wall of the switch housing. 6. Tighten screws securely. WARNING: Make sure main power is turned off.! 3. Fan wobbles excessively. 1. Setscrew in motor coupling is loose. 2. Setscrew in hanger ball/downrod assembly is loose. 3. Screws securing fan blade flanges to motor hub are loose. 4. Fan blade flanges not seated properly. 5. Hanger bracket and/or ceiling outlet box is not securely fastened. 6. Fan blades out of balance. 1. Tighten the setscrew in the motor coupling. 2. Tighten the setscrew in the hanger ball/downrod assembly. 3. Check to be sure screws which attach the fan blade flanges to the motor hub are tight. 4. Check to be sure the fan blade flanges seat firmly and uniformly to the surface of the motor hub. If flanges are seated incorrectly, loosen the flange screws and retighten 5. Tighten the hanger bracket screws to the outlet box, and/or secure outlet box. 6. Interchanging an adjacent (side-by-side) blade pair can redistribute the weight and result in smoother operation. Air Comfort Productr DIVISION OF EMERSON COMPANX Printed in Taiwan 04/03 8100 W. Florissant . St. Louis, MN 63135 Part No. F40BP72340003 Form No BP7234-3 ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :