Évaluations - , GPA: ( )

Instructions Delta Electronics, Modèle DF 6260

Fabricant : Delta Electronics
Taille : 285.16 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

1) - Fig. 11 On wall units with a body depth of 275 mm to 335 mm, the vapour catcher depth can be adjusted as follows: • Remove both grease filters. • Loosen the screws on both end-stop brackets and set the vapour catcher depth (min. 275 mm, max. 335 mm). • Refit the screws. • Refit the grease filters. Fig. 10 Fig. 11 Installing the front panel (see also “Special accessories”) • Remove first the rear then the front grease filters. • Remove the internal cover pressing both unlocking devices (press and pull). Fig. 12. • Predrill the front panel as per template and fix it to the vapour catcher with 3 screws. Fig. 13-14. • Clip the Internal cover back in and insert both grease filters (first the front one and then the rear one). Fig. 15 Fig. 14Fig. 13 Installing the front panel (see also “Special accessories”) • Remove first the rear then the front grease filters. • Remove the internal cover pressing both unlocking devices (press and pull). Fig. 12. • Predrill the front panel as per template and fix it to the vapour catcher with 3 screws. Fig. 13-14. • Clip the Internal cover back in and insert both grease filters (first the front one and then the rear one). Fig. 15 Fig. 14Fig. 13 AEG Hausgerate GmbH Postfach 1036 D-90327 Nurnberg © Copyright by AEG LI1SJB ed 01/02 ...