Log:
Évaluations - 3, GPA: 4 ( )

Instructions Creda, Modèle 793685

Fabricant : Creda
Taille : 635.77 kb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


When a new heater is run up to temperature/ the materials will produce a slight smell for the first few days/ these are normally harmless in a well ventilated room. It is best to make these first overnight charges with the 'Input' control knob at 'Maximum'. Caged birds, young children and people with chest ailments are best kept out of the room for this first period. output Supaslim Combi * 6 n\j 1 mm m SETTING THE CONTROLS The controls are located under the lockable flap at the right hand corner of the top panel. To adjust the controls on the heater use a coin and engage it in the slot provided on the top surface of the knob. AUTOMATIC CHARGING DEVICE (AUTO-SET Fitted only on 'ACW' models) The Auto-Set Control rations the overnight charge each night by sensing the room temperature. The knob is marked with the numbers 1 to 6, turning the knob to a lower number will reduce the charge consequently/ the level of room warmth the next day. Once set, the knob should need no further adjustment and the Auto-Set will maintain automatically the room warmth each day by varying the charge according to the weather. 1. Set the room temperature (output) control knob to setting 4. 2 Turn the Auto-Set Knob clockwise as far as it will go. 3. Leave the heater to run in this condition for two nights in order to quickly disperse the 'new' smell which although slight/ is better removed once and for all. 4. Instruct the user to set the Auto-Set down to his chosen setting on the third day. Instructions on this are given in the Users Guide which we ask you to ensure is left with the user. MANUALLY ADJUSTED HEATER (without Auto-Set Control) On this the user sets the overnight charge on the numbered knob marked 'Input'. Setting up procedure; 1. Turn the 'Input' knob to maximum setting (6) 2. Set the 'Output' knob to setting No. 4. 3. Leave the heater to run in this condition for two nights in order to quickly disperse the new smell. 4. instruct the user to set the 'Input' to his chosen setting on the third day. Instructions on this are given in the Users Guide which we ask you to ensure is left with the user. Part No. 85901 Iss. No. 3 1 2/03...

Ce manuel est également adapté pour les modèles :
Ventilateurs - 75772001S (635.77 kb)
Ventilateurs - 75772002S (635.77 kb)
Ventilateurs - 75772003S (635.77 kb)
Ventilateurs - 793485 (635.77 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories