Log:
Évaluations - 4, GPA: 4 ( )

Instructions Vitek, Modèle VT-1900

Fabricant : Vitek
Taille : 235.32 kb
Nom Fichier : Vitek-VT-1900-Pdf-Rus.Pdf
Langue d'enseignement: ruen
Aller à la télécharger



Facilité d'utilisation


When not using the timer, set the knob (5) at "ON". If the knob is set on "OFF" the fan will not operate even if you push the push-button switch. CAUTION The fan should not be operated without a base nor used laying on its side. 3 1900.qxd 02.12.03 17:23 Page 8 ENGLISH OSCILLATION Operated by manipulating oscillation switch (6) Starts oscillation. Stops oscillation. Not oscillate when the push-button (4) is set at "OFF" or timer knob (5) is set at "OFF". CLEANING BODY: FAN: Use a soft tissue or cloth to clean, In case dirt or grime does not come off easily, use soapy water. Do not use benzine thinner or other solvents. Use a vacuum cleaner to clean. In case dirt or grime does not come off easily, use a brush. Do not use benzine or other solvents. Do not remove the fan from the front case. CAUTION: -Q- Take care not to stain the plastic parts with oil. Avoid using the place (Kitchen or the like) oil is liable to stick to the parts. Damage, deterioration, etc. are always caused by oil sticking. SPECIFICATION Power Voltage 3-speed control 75 degree oscillation 50 W 220-230 V~ 50 Hz SERVICE LIFE OF THE FAN NOT LESS THAN 5 YEARS 4 РУССКИЙ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories