IMPORTANT: Save these Instructions for the Local Electrical Inspector’s use. INSTALLER: Leave these Instructions with this unit for the owner. OWNER: Retain these instructions for future reference. SAFETY WARNING Turn off power circuit at service panel and lock out panel before wiring this appliance. REQUIREMENT: 120VAC, 60 Hz. 20A Branch Circuit READ AND SAVE THESE INSTRUCTIONS 2 3 TIMER 1 EUROCHEF - PRO WALL HOOD EUROCHEF U.S.A. 41 MERCEDES WAY SUITE 25 EDGEWOOD NEW YORK 11717 – TEL. 866-844-6566 WWW.DELONGHIMAJORAPPLIANCES.COM WWW.DELONGHI RANGES.COM EUROCHEF - PRO WALL HOOD EUROCHEF -PRO WALL HOOD HOODS WEIGHT MODEL NUMBER FEATURES 24” range hood with 600 CFM blower 30” range hood with 600 CFM blower 36” range hood with 600 CFM blower 22 lbs 30 lbs 36 lbs ECPH24S ECPH30S ECPH36S Controls: Fabrication: 4-speed electronic with 15” minute delayed shutoff timer Welded, polished and brushed seams All edges hemmed 48” range hood with 1200 CFM blower 48 lbs ECPH48S Features: 304 stainless hood baffle filter and grease tray 12V halogen lighting, lamps included Top and Back ducting 24”, 30”, 36” hoods Transition to 8” round with damper included Install to wall or cabinets ACCESSORIES MODEL NUMBER WARMING LAMP KIT Includes 175W Warming Lamps, rocker switches, quick connect wiring. Field installable. 24”/30” Warming Lamps Kit: (1) 175W Warming Lamp EC LAMP24/30 36” Warming Lamps Kit: (2) 175W Warming Lamp EC LAMP36 48” Warming Lamps Kit: (2) 175W Warming Lamp EC LAMP48 BACKSPLASH WITH WARMING SHELVES KIT Includes telescoping 2-piece backsplash, removable & dishwasher safe shelves 24” Backsplash with (1) shelf EC BKSPL24 30” Backsplash with (1) shelf EC BKSPL30 36” Backsplash with (2) shelf EC BKSPL36 48” Backsplash with (2) shelf EC BKSPL48 RECIRCULATING KIT Includes 4” high duct cover, 90 degree transition, charcoal filters NOTE: Do not use with indoor BBQ. Do not use with Blower Upgrade Kit (below). 24” Recirculating Kit EC DLK24 30” Recirculating Kit EC DLK30 36” Recirculating Kit EC DLK36 Not Available for 48” Hoods REPLACEMENT CHARCOAL FILTER For use with Recirculating Kit Only Includes 2 Sets of Filters EC FILT BLOWER UPGRADE KIT Kit for 30” and 36” hoods only. Includes 600 CFM blower. Not for use with Recirculating Kit or horizontal ducting EC BLMT DUCT COVER 6” Stackable 304 stainless steel. 24” wide 6” high duct cover EC CVR246W 30” wide 6” high duct cover EC CVR306W 36” wide 6” high duct cover EC CVR366W 48” wide 6” high duct cover EC CVR486W DUCT COVER 12” Stackable 304 stainless steel. 24” wide 12” high duct cover EC CVR2412W 30” wide 12” high duct cover EC CVR3012W 36” wide 12” high duct cover EC CVR3612W 48” wide 12” high duct cover EC CVR4812W Air-2 EUROCHEF -PRO WALL HOOD EUROCHEF -PRO WALL HOOD READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. B. Before servicing or cleaning unit, switch power off at the service panel and lock service panel to prevent power from being switched on accidentally. If the service panel cannot be locked, fasten a tag or prominent warning label to the panel. • For general ventilating use only. Do not use to exhaust hazardous or explosive materials or vapors. • Structural framing, installation work and electrical wiring must be done by qualified person(s). In accordance with all applicable codes and standards including tire-rated construction. • Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. • Local codes vary. Installation electrical connections and grounding must comply with applicable codes. In the absence of local codes, the vent should he in-stalled in accordance with National Electrical Code ANSI/NFPA 701990 or latest edition. ADVERTISSEMENT POUR REDUIRE LE RISQUE D’INCENDIE, DE CHOC ELECTRIQUE OU DE BLESSURES, IL FAUT OBSERVER LES REGLES SUIVANTES: A. Utiliser cet appareil uniquement de la maniere prevue par le fabricant. En cas de question, consulter le fabricant. B. Avant toute intervention ou nettoyage, couper l’alimentation electrique au disjoncteur et verrouiller le panneau du disjoncteur pour eviter la mise sous tension accidentelle. S’il n’est pas possible de verrouiller le panneau du disconcteur, attacher un placard ou une etiquette tres visible au panneau. • For general ventilating use only. Do not use to exhaust hazardous or explosive materials or vapors. • Structural framing, installation work and electrical wiring must be done by qualified person(s). In accordance with ...