Log:
Évaluations - , GPA: ( )

Instructions Best, Modèle IP29 SERIES

Fabricant : Best
Taille : 323.92 kb
Nom Fichier : c2e38b9b-65ab-4da6-a830-57269218774f.pdf

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter

Facilité d'utilisation


Bulbs included.) • Four-speed push button blower control • Exclusive, Heat Sentry™ turns blower ON to HIGH speed when excess heat is detected • Air refresh feature - runs the blower at low speed for 10 minutes every 50 minutes • Exclusive Intelligent Linking system, uses Insteon technology to communicate with other Best and Broan equipped or specified product • Filter maintenance indicator - shows when to clean filters • Exclusive A.S.C. (Automatic Sensor Control) - uses particulate detection to activate blower when effluents from cooking are sensed DECORATIVE FLUE EXTENSION: AEIP Series (Optional) • Professional Grade Stainless Steel (Type 304 or equivalent) • Widths - 42” and 54” • Height - 12”, 18”, 24”, and 30” DECORATIVE DRYWALL TRIM KIT: ATDIP Series (Optional) • Professional Grade Stainless Steel (Type 304 or equivalent) • Widths - 42” and 54” SPECIFICATION: • 120 VAC, 60 Hz, • 2.5 Amps (without blower - 42” width) 3.3 Amps (without blower - 54” width) IP29 Series Hood ATDIP Series Drywall Trim Kit (Optional) AEIP Series Decorative Flue (Optional) Best by Broan, P.O. Box 140, Hartford, WI 53027 Best by Broan, 55o Lemire Blvd., Drummonville, QC J2C 7W9 Canada REFERENCE QTY. REMARKS Project Location Architect Engineer Contractor Submitted By Date 80B 99044167A IP29M SERIES RANGE HOOD SYSTEM -INTERIOR BLOWERS Model 437 (High capacity roof cap) Model 441 (10'' Round wall cap) Model 647 (7” Round wall cap) Model 634 or 644 (roof cap) Model 41 (10” round adjustable elbow) Model 421 (10” Round vert. in-line damper Optional) Model 410 (10” round duct—2 ft. sections) Model 427 (41/2” x 181/>” to 10” Round, 6” high - lateral Model 415 (7” round adjustable elbow) Model 407 (7” round duct—2 ft. sections) Model 423 (41/2” x 181/2” to 10” Round - vertical 10” Round - horiz. front/rear (41/2”x 181// to 10” Round horiz. /right Model 453 (41/2” x 181/2” to 10” Round horiz. /left ____________J OPTIONAL DECORATIVE FLUE AEIP SERIES OPTIONAL DRYWALLTRIM ATDIP SERIES MODEL P12 BLOWER/ROUGH-IN KIT (1200 cfm interior blower & rough-in plate) IP29M SERIES HOOD (Canopy with blower controls & lighting. Required for all installations.) MODEL P6 BLOWER/ROUGH-IN KIT (600 cfm interior blower & rough-in plate) beoc - IP29M SERIES RANGE HOOD SYSTEM -IN-LINE AND EXTERIOR BLOWERS Model 437 (High capacity roof cap) Model ILB9 (800 cfm) or ILB11 (1100 cfm) in-line blower (includes two 8” x 12” to 10'' round transitions) Model 441 (10” Round wall cap) ,, , _______________ , Model EB12 (1200 cfm) or EB15 (1500 cfm) Model EB6 (600 cfm) exterior blower or EB9(900 cfm) exterior blower Model 643 (8” Round wall cap) 0 Model 441 (10” Round wall cap) Model ILB3 (280 cfm in-line blower (includes one 8” to 10” round transition) Model ILB6 (600 cfm) in-line blower (includes two 41/2” x 18%” to 10'' round transitions), --""Model 41 10” Round adjustable elbow (optional) Model 410 (10” Round duct —2ft. sections) OPTIONAL DECORATIVE FLUE AEIP SERIES ’Model 421 (10” Round vert. in-line damper) Recommended for use with exterior blowers OPTIONAL DRYWALL TRIM ATDIP SERIES IP29M SERIES HOOD (Canopy with blower controls & lighting. required for all installations.) In-line and exterior blower rough-in kit (included with EB6, EB9, EB12, EB15, ILB3, ILB6, ILB9 and ILB11 blowers.) beoc...

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories