Évaluations - 2, GPA: 4 ( )

Fabricant : Broan Taille : 664.1 kb Nom Fichier : E30WV60EPS_01_09.pdf Langue d'enseignement:

i \\, \^\\\ \m\;\ \ \ \\w \S\V\ \ Infinite-Speed Blower Control The ultraquiet blower allows you to dial in the precise airflow needed. 9" WALL-MOUNT CANOPY VENT HOOD FEATURES Nominal Width 30" Installation Type Wall Mount Air Discharge Vertical Only Air Delivery (CFM) 600 Blower Type Centrifuqal Controls Dial Infinite-Speed Blower Yes Dual Halogen Lights Yes Dishwasher Safe Stainless Steel Filters Yes Exhaust Duct External Duct Required 8" Round ACCESSORIES 18"-High Vent Duct Cover - PN# ACCVC18-30 Optional 12"-High Vent Duct Cover - PN# ACCVC12-30 Optional 6"-High Vent Duct Cover - PN# ACCVC06-30 Optional SPECIFICATIONS Overall Exterior Dimensions - Height 9" Width 29-7/8" Depth 24" Power Supply Location Right Rear Top Voltaqe Ratinq 120V/60Hz/15 or 20A Connected Load (kW Ratinq) @ 120 Volts* 1.4 Shipping Weight (Approx.) 54 Lbs. tFor use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. NOTE: Always consult local and/or national electric codes. Refer to Product Installation Guide for detailed installation instructions on the web at electruluxicon.com. Specifications subject to change. Dual Halogen Lighting with Dimmer Control Two overhead halogen bulbs evenly illuminate the cooking surface and provide abundant light to enhance the cooking experience. Dishwasher Safe Filters Saturated filters can be rinsed and cycled through the dishwasher. The stainless steel filter provides strength and durability not found in foam filters. Wall-Mount Installation This wall-mount hood provides power, illumination and 9 inches of height. The crowning touch for your cooktop. electroluxicon.com Wall-Mount Canopy Vent Hood g] Electrolux icon® E30WV60EPS \ \ \ \\ \ \ \ \ \ V \ \vV v \ i MlW \vM\\\\\ > Exhaust Duct Location Top Electrical Location I I 11/2" -9"H ^ , 2 - 7/s" holes "t 11/2" Top 9" Wall-Mount 30" Canopy Vent Hood Specifications • Product Weight - 51 Lbs. • Wall-Mount Installation - can only be ducted vertically. • Voltage Rating -120V/60Hz/15 or 20 Amps • Connected Load (kW Rating) @ 120 Volts = 1.4kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @120 Volts =12 Amps • Always consult local and/or national electric codes. Check local building codes for installation requirements, as they may vary per locale. • Vent unit outside of building only. • Vertical Exhaust Duct Required - 8" round • For most efficient airflow exhaust, use a straight run or as few elbows as possible. • Use metallic flex ducting only to connect rigid duct directly to transitions (if allowed by code). • Thermal breaks such as short section of nonmetallic duct, should be used in areas of extreme cold. • Cold weather installations should have additional backdraft damper installed. • For most efficient operation, p...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :