Évaluations - , GPA: ( )

Instructions Hitachi, Modèle VT-FX530A

Fabricant : Hitachi
Taille : 1.45 mb
Nom Fichier : a416b755-9442-4962-a865-b99b16291f93.pdf

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

You need to select the appropriate channel. • When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the VCR. The POWER indicator will light up and the VCR indicator will flash. Press the CHANNEL A button alternates between channel 3 and channel 4. The VCR will stop flash. If within 30 seconds, the CHANNEL A button not been press, the VCR will terminate the selection of RF Channel. ADVANCED CABLE HOOKUP -WITH CABLE BOX [F] WITH THIS HOOKUP_ YOU CAN... • WATCH AVAILABLE CABLE CHANNELS • RECORD AND WATCH THE SAME CHANNEL YOU CAN'T... • RECORD ONE CHANNEL AND WATCH ANOTHER ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX. BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX OUTPUT CHANNEL. Hookup F Illustration 13 TABLE F FUNCTION CHANNEL SELECTION VCR indicator (Press the VCR/TV mo CD T Remote Control Illustration. 4 Press the (1) button for AM or (2) for PM. For example, press the (1) button for AM. 15 5 Press the number buttons to fill in the number of the month, then the day then the year. • For dates with only one number (1-9) press the (0) button first, then the date. For example, if today is July 8 1998, press (0)(7)(0)(8)(9)(8). The correct day of the week will appear by itself. CD CD CD CD CDXD Hl*i MS nnap ah i Y/YEAR 6 Press the GUIDE button. The VCR clock is now set, and if you press the DISP button, the correct time of the day appears on the TV screen. GUIDE Notes: • The clock uses the 12-hour system. You set it for AM or PM. • An illogical time (like 13 for the hour or 20 for the month) will not be accepted. • If you press the wrong digit, exit the screen by pressing GUIDE and recall the screen to enter the correct setup. PRE-TUNING THE VCR TUNER Note: An antenna or cable must be connected to the VCR before you begin this operation. • Presetting the received channels without using a cable box (Hookups [A], [B], [C] or [D]) 1 Press the POWER button to turn on the VCR. ' power! 16 2 Turn on the TV and select the video channel (3 or 4). Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO. 3 Press the GUIDE button. The main on-screen menu will appear on the TV screen. GLJiQE Remote Control Illustration. 4 Press the (4) button to select the CHANNEL PRESET operation. % 5 Press the (1) button to select the type of receiving setup you have: Ordinary cable Internal or external antenna Alternate cable (If CATV1 do...