Log:
Évaluations - 2, GPA: 3 ( )

Instructions Mitsubishi Electronics, Modèle HS-U778

Fabricant : Mitsubishi Electronics
Taille : 934.85 kb
Nom Fichier : 14b809d4-7cc4-4802-956c-a8f3fd8fd171.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


For example, to find the third index mark ahead, press INDEX ^I three times. The on-screen display will count down the number of marks passed before playback begins. 3 To cancel index search, press PLAY or STOP. 21 3 54 6 87 9 0 X2 INDEX STOPREC VCR Counter zero stop Use ENTER to start VCR Looking for index+ 1 UaaaaaaaaU REM 1:40 0h20m08s Advanced Features repeat playback You can playback a section of tape over and over using repeat playback. The tape will play until the next index mark, rewind to the previous index mark, and resume playing. If there is only one index mark on the tape, then theVCR will play or rewind to that mark and resume playback. If there is no index mark, the entire cassette will repeat. 1 Press AUDIO/VIDEO on the remote control to display the function menu. Press AUDIO/VIDEO until the Repeat play function appears. 2 To start the playback, press ENTER. When theVCR encounters the next mark or the end of the tape, it will automatically rewind to the previous mark and begin playback again. TheVCR will also search for a blank section of tape. If the VCR encounters any blank sections longer than 4 seconds in length, the repeat playback will begin. 3 Press STOP to cancel the repeat. Search to blank This feature allows you to find the end point of the recorded part of the tape. The VCR will stop automatically at the beginning of the blank section of a tape. 1 Press AUDIO/VIDEO on the remote control to display the function menu. Press AUDIO/VIDEO until the Search to blank function appears. 2 To start the search, press ENTER. When the VCR encounters the blank section of a tape, it will automatically stop. IMPORTANT IMPORTANTIMPORTANT This feature may not work correctly when the end point of the recorded part is within 5 minutes in SP mode (15 minutes in EP mode) from the current position. Using PrograManager PrograManager feature allows you to memorize the channel, month, date, hour and minutes of the programs you have recorded, and displays the list to confirm the contents of the tapes or to search the program which you want to playback. To use PrograManager, you have to assign a number for each tape that you want to use this feature with and also specify the tape length (for example,T-120,T-160, etc.) before the recording can start. Also, the clock must be set correctly. When it has been set and program is recorded for more than 5 minutes in SP mode and/ or 15 minutes in EP mode, the recorded contents will be memorized in theVCR. This memorized data will be displayed and be used repeatedly when this tape is loaded again and its assigned tape number is entered. The VCR can memorize the contents of up to 10 tapes (12 programs per tape at the maximum). If you record more than 13 programs for one tape, the memorized data will be erased from the first recorded program. You can erase the data of each tape. If you set the Auto PrograManager in the Customize Choices menu to ON, the screen to decide whether you set the tape number will appear when the tape is loaded. See page 51 for more information on the Auto PrograManager. Memorizing the contents of the tape To memorize the contents of the tape, you have to assign a tape number and specify the length of the tape before the recording can start. VCR Repeat play Use ENTER to start VCR Search to blank Use ENTER to start Advanced Features IMPORTANT IMPORTANTIMPORTANT Make sure that the clock has been set correctly before memorizing the contents of the tape. 1 Load the tape. Press MENU on the remote control. VCR Main Menu appears. Press the ADJUST buttons to select PrograManager. Press ENTER. 2 The PrograManager menu will appear. Press the ADJUST buttons to select Assign/Enter Tape No. and press ENTER. 3 The screen for selecting the tape number appears. Press the number button that corresponds to the desired tape number (for example, no.0). Press ENTER. 4 The screen for setting the tape length appears. The tape length that you have set in the audio and video function menu will be highlighted. If the highlighted setting is not match the length of the tape to be recorded, press the ADJUST buttons to highlight the correct setting. Press ENTER. 5 The message to confirm the selected tape number and tape length will appear. Press ENTER to enter the displayed tape number and length. If the displayed number or length is not correct, press MENU. The PrograManager menu will reappear. Set the tape number and length again by following the directions from step 2. 6 The contents of the tape of the selected tape number will be displayed. Press MENU three times to turn the menu off. If you want to search the listed program, follow the procedure from step 4 on the next page. 7 Record the program. The contents of that tape will be memorized automatically when you eject the tape. After the recording is finished, write the tape number on its label to avoid assigning the wrong tape number when you memorize the contents for that tape again. When you want to memorize the data ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories