Évaluations - , GPA:
(
)
)
Fabricant : Audiovox
Taille : 6.31 mb
Nom Fichier : 92043c54-dde5-4bab-bb3c-a020d2999e91.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Press this key once more, the tape will advance at a high speed. Ul 0 • Press the REW key once in the playback mode. And then the tape is rewound rapidly with the pictures. Press this key once more the tape will rewind at a high speed. ► PUT 6 • Press the PLAY key during playback and then the VCP enters the ReAuto Tracking mode. 12 IDENTIFICATION FRONT PANEL When power is supplied to the set, the power indicator The Power ON and Power OFF mode will be toggled by When the POWER is switched on, the power lamp will light up in red and the other keys will light up in green. Press this key to stop tape and once more to eject tape. If this key is pressed in the PLAYBACK mode, the VCP enters the reverse picture search mode. If pressed in STOP mode, then the tape will rewind at high speed. The REW indicator lamp will light up in orange. 13 ©PLAY KEY Press this button to playback a recorded tape, or to release special operations such as the search modes. In the playback mode the indicator playback lamp will be ON in orange, and in the AUTO Tracking mode this indicator lamp will blink. © FAST FORWARD/CUE KEY If this key is pressed in the PLAYBACK mode the VCP enters the forward picture search mode. If FF is pressed while tape is in STOP mode then unit will fast forward at high speed. When the FF key is pressed, the indicator lamp will light up in orange. ©CASSETTE-IN LAMP When the cassette is inserted, the CST-IN lamp will light up in green. ©DEW LAMP This indicator will flash (if power is on) to Indicate excessive moisture has been inside of VCP. Unit will not operate till it dries out sufficiently (the tape can be ejected from unit). When DEW mode has been activated, leave unit on to allow it to dry out completely. This will take approximately 1 hour. 14 REAR PANEL r-OC ® FUSE HOLDER The main line fuse is accessible with the external fuse holder simply by unscrewing the cap. If the main line fuse should blow then replace the fuse with a proper rated fuse (125V, 2A). <2> RF OUT CHANNEL SELECTION SWITCH Set to channel 3 or channel 4, whichever is not being broadcasted in your area. 15 ® ANT. IN For connecting the TV antenna to this terminal. ©VIDEO OUT Connect this terminal to VIDEO IN terminal of your television, using the RCA cord provided. ©AUDIO OUT Connect this terminal to AUDIO IN terminal of your television, using the RCA cord provided, © RF. OUT For connection to the antenna terminal of a TV receiver through the coaxial cable. ©© DC JACK IN Connect this jack to DC Source (DC 12V). NOTE: This VCP is for 12V use only so do not use it in 24V vehicles. If you use this set in a 24V vehicle, all the lamps will blink. To avoid the malfunction of this set please disconnect the plug from the ■ power source. 16 You can apply this method to DC 12V output only. Please connect to the vehicle only after making sure of the polarity of the cigarette lighter socket, (negative earth) 17 HOW TO USE THIS METHOD • You can apply this method to only DC 12V output. • If you apply more than 18 volts then the power will automatically turn off. • Please connect after making sure of the polarity of the cigarette lighter socket. • If the polarity is reversed the unit will not operate. • Use of this VCP is not recommended in excessive heat. • If inside temperature of vehicle is over 100 F do not use VCP. Allow VCP to cool before use. 18 AUTO TRACKING ADJUSTMENT • Since this VCP has the Auto Tracking Adjustment function, it can play clear pictures without special operations. • Auto Tracking Adjustment operates automatically when the cassette is inserted. • Playback indicator lamp blinks during auto tracking operation. If the tracking is completed, the playback Indicator lamp lights on. • If noise bars appear in the picture during playback, press the PLAY key to operate Re-Tracking function. NOTE : This VCP has Auto Start Feature. This VCP will automatically power on and go into PLAY mode when a cassette is inserted. PLAY key 19 BEFORE CALLING SERVICE PERSONNEL SYMPTOMS CAUSE POSSIBLE SOLUTIONS POWER NO POWER • The power cord is not connected. • The polarity of power cord is not correct. • Connect the power cord. • Change the polarity of power cord. PLAYBACK No picture on screen when playing back a recorded tape. • The TV is not set to the video channel, 3or 4. • Set your TV to the video channel, 3 or 4. Noise bars on screen. • Tracking is not adjusted. • Adjust the picture to be clear by pressing the PLAY key. OTHERS • Operation keys do not work. • If the cassette or the VCP is not in normal condition, every indicator LED/ LAMP is lit up and the VCP does not work. • Turn off the power and turn on the power again by pressing the POWER key. • Unplug and replug the power cord. Cassette is ejected upon inserting. • Safety device works to protect the cassette when it is inserted incorrectly. • Pull the cassette out (unloading) and insert it firmly into the cassette compart...