Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
• To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 30. 9 9 Press [TIMER SET] to set a timer programming. will appear on the front panel display. BSCSDRCDHDDDVD "VCR” will appear if VCR timer recording have been set. Note • If you have not set the clock yet: “Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 4 in “Clock Setting” on page 23 before setting a timer programming. • Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu. • If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are the same, the timer recording will start without canceling the recording currently in progress. In this case, the recording of the same channel will be made on both DVD and VCR. • Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode. • In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed. Introduction Connections Basic Setup Recording Playback EditingFunction VCR Functions Others Espanol EN ENEN 29 TIMER RECORDING Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.1) Press [TIMER SET]. will disappear on the front panel display. 2) Press [TIMER]. 3) Check the information on the list you will need. Timer Programming 1/1 TUE JAN/01 11:00AMSP (1:00) JAN/ 2/08 12:00 AM E1 SP Date Start End E1/E2 JAN/02 12:00AM 1:00AM E1 New Program Timer Programming 1/1 WED JAN/02 11:00AM Date Start End E1/E2 E41 JAN/02 12:00AM 1:00AM E1 New Program E1-22 E37-39 Recording error other than below E41 Power failed E24 Unrecordable disc E42 No disc when recording E25-26 Copy prohibited program E43 Already 49 titles recorded E29 Disc protected E44 Already 254 chapters recorded E30 Disc full E45 Copy prohibited program E35 PCA full *1 E46 It is impossible to record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”. E36 Already finalized video format disc E40 Some portion has not been recorded because of program overlapping. Recording did not start at the starting time. TIMER RECORDING Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.1) Press [TIMER SET]. will disappear on the front panel display. 2) Press [TIMER]. 3) Check the information on the list you will need. Timer Programming 1/1 TUE JAN/01 11:00AMSP (1:00) JAN/ 2/08 12:00 AM E1 SP Date Start End E1/E2 JAN/02 12:00AM 1:00AM E1 New Program Timer Programming 1/1 WED JAN/02 11:00AM Date Start End E1/E2 E41 JAN/02 12:00AM 1:00AM E1 New Program E1-22 E37-39 Recording error other than below E41 Power failed E24 Unrecordable disc E42 No disc when recording E25-26 Copy prohibited program E43 Already 49 titles recorded E29 Disc protected E44 Already 254 chapters recorded E30 Disc full E45 Copy prohibited program E35 PCA full *1 E46 It is impossible to record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”. E36 Already finalized video format disc E40 Some portion has not been recorded because of program overlapping. Recording did not start at the starting time. 4-A) To delete the timer program: 1 Use [K / L] to select the program you want to delete, then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. Confirmation window will appear. 3 Use [K / L] to select “Yes”, then press [OK]. 4-B) To correct the timer program: 1 Use [K / L] to select the program you want to correct, then press [OK]. 2 Use [K / L] to select “Program Change”, then press [OK]. 3 Correct the timer program by using [K / L / { / B], then press [OK]. 5) Press [TIMER] to exit. 6) Press [TIMER SET] to return to the timer standby mode. To stop the timer recording in progress Press [STOP C] on the front panel to stop the disc recording. Press [STOP C/EJECT A] on the front panel to stop the cassette tape recording. [STOP C] on the remote control is not effective. Note • Press [TIMER] to check the timer recording in progress. When the timer recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program. Each error number means: • E23, E27, E28, E31, E32, E33 and E34 are not displayed. • A program with the error number is gra...