Évaluations - 2, GPA: 3.5 ( )

Fabricant : JVC Taille : 2.64 mb Nom Fichier : 4c9bbacf-031a-42de-8bd7-b5627a39ea99.pdf Langue d'enseignement:

. To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO until “NORM” appears on the front display panel or on the screen. “O.S.D.” must be set to “ON” or the on-screen displays will not NOTE: appear (. 15). To record stereo and bilingual programmes (A2) . Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound). . Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track. To record NICAM stereo and bilingual programmes The NICAM audio programme is recorded on the Hi-Fi audio track, and the standard audio programme on the normal audio track. . NOTES: If the quality of stereo sound being received is poor, the broadcast may be received in monaural with better quality. . Before playing back a programme recorded in stereo, or a bilingual programme, refer to “Soundtrack selection” (. 8). S-VHS (Super VHS), S-VHS ET or VHS Recording Mode This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS. . To record in S-VHS: Set “S-VHS MODE” to “ON” (. 16). Then, insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the display panel. The S-VHS recording mode is selected. . To record in S-VHS ET on a VHS cassette: Set “S-VHS ET” to “ON” (. 16). Then, insert a cassette marked “VHS”. The S-VHS indicator lights up on the display panel. . To record in VHS: Insert a cassette marked “VHS”. Set “S-VHS ET” to “OFF” (. 16). . To record in VHS on a S-VHS cassette: Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the display panel. Then, set “S-VHS MODE” to “OFF” (. 16). The S-VHS indicator goes off. The VHS recording mode is selected. NOTE: When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights up on the display panel regardless of the “S-VHS ET” (. 16) or “S-VHS MODE” (. 16) setting. —9— Timer Recording Up to 8 timer recording programs can be made using G-CODE/ SHOWVIEW timer programing or Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. NOTES: . If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen. . After timer recording is completed, the recorder turns off automatically. . You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded. . In case of a power failure after programming, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted). G-CODETM/SHOWVIEWTM System Setup INFORMATION G-CODE and SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODE system will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODE system. The G-CODE timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-CODE number for the TV programme you wish to record (found in most TV listings) and the recorder's timer is automatically programmed. You have to set “GUIDE PROG” numbers, which are assigned to each station for purposes of G-CODE timer programming, for all the stations stored in your recorder’s memory to get proper results. Before G-CODE setup you must have performed the procedures of Tuner Set and Clock Set. IMPORTANT Perform the following procedure after Auto Set Up and/or the channel setting steps. After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re- perform Guide Program Number setting. Guide Program Number Set A Access Main Menu screen, then Initial Set screen Press MENU on the remote control. Press PUSH JOG rtto place the pointer next to “INITIAL SET”, then press OK or PUSH JOG e. B Access G-CODE/SHOWVIEW Setup screen Press PUSH JOG rtto place the pointer next to “G-CODE/ SHOWVIEW SETUP”, then press OK or PUSH JOG e. C Input Guide Prog number Press PUSH JOG rtor the Number keys to select the Guide Program number as shown in the TV listing, then press OK or PUSH JOG e. D Input receiving channel number Press PUSH JOG rtor the Number keys to select the number of the channel on which the Guide Program number’s broadcasts are received, then press OK or PUSH JOG e. . If the satellite broadcast is received on your recorder's auxiliary channel (“L-1” or “F-1”), select “L-1” or “F-1” for the channel position to which the satellite receiver is connected. G-CODE/SHOWVIEW SETUP [MENU] : EXIT[0-9] OR [R/T]: SELECT GUIDE PROG TV PROG 2 5 GUIDE PROG TV PROG 2 2 G-CODE/SHOWVIEW SETUP [MENU] : EXIT[0-9] OR [R/T]: SELECT . Repeat steps 3 3333 and 4 4444 as necessary. E Return to normal screen Press MENU on the remote control. G-CODETM/SHOWVIEWTM Timer Programming Before performing G-COD...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :