Évaluations - , GPA:
(
)
)
Fabricant : Panasonic
Taille : 2.69 mb
Nom Fichier : PVL353.PDF
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Press (FADE) again to fade in. EVF or LCD monitor 1, 2, 3, 4, 5, 6 7 8 Digital Zoom Power Zoom magnification is digitally Before you begin... increased. • Connect Camcorder to power source. • Set POWER to CAMERA. 1, 2, 3, 4, 5 1 Press MENU for MENU mode. Press UP or DOWN to select DIGITAL EFFECTS . 2 Press M.FOCUS for DIGITAL EFFECTS menu. Press UP or DOWN to select DIGITAL ZOOM . 3 Press M.FOCUS repeatedly to select D.ZOOM1, D.ZOOM2, or OFF. D.ZOOM 1 : 150. maximum D.ZOOM 2 : 700x maximum OFF : Turn off D.ZOOM The Higher digital magnification levels may cause picture distortion. 4 Press MENU twice to exit. 5 Press “T” on POWER ZOOM. Digital Zoom starts when normal zoom reaches maximum (20.). • Zoom level appears in EVF or LCD monitor. • POWER ZOOM switch controls digital zoom level. • Normal zoom resumes when level falls to 20.. 6 Repeat steps 2~3 to select OFF to cancel this feature. 28 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Digital Electronic Image Stabilization (E.I.S.) Helps stabilize picture when recording in Before you begin... unstable situations. • Connect Camcorder to power source. • Set POWER to CAMERA. 1, 2 NORMAL Digital EIS ON 1 Press (EIS) to display “EIS” in the EVF or LCD monitor. • Image becomes slightly enlarged and shutter speed auto-adjusts from 1/80 to 1/350 according to brightness. • Use High Speed Shutter (page 25) if needed. Shutter speed setting remains after EIS is canceled. 2 Press (EIS) again to cancel when not in use. E.I.S. may not function during... • extreme Camcorder movement. • recording of subjects with distinct horizontal or vertical stripes. • low light situations (EIS indicator flashes). • intense fluorescent lighting situations. • recording of very fast motion. Special Features 29 MotionSensor Recording starts automatically if motion is detected. 1, 2, 3, 4 Before you begin... • Connect Camcorder to power source. Use AC Adaptor for longer recordings. • Insert cassette with record tab (page 11). • Set POWER to CAMERA. • Securely position and aim Camcorder. 1 Press MENU for MENU mode. Press UP or DOWN to select DIGITAL EFFECTS . 2 Press M.FOCUS for DIGITAL EFFECTS menu. Press UP or DOWN to select MOTIONSENSOR . 3 Press M.FOCUS to select ON. MotionSensor may mistakenly start when: • background is plain, like a white wall, or has distinct vertical, horizontal, or slanted stripes, like a venetian blind. • brightness suddenly changes. MotionSensor may not start when: • motion is very slow or fast. • moving object is very small. • motion occurs only in 1 corner of viewing area. • in poor lighting (in this case, MOTIONSENSOR flashes). • background is plain, like a white wall, or has distinct horizontal or vertical stripes. 4 Press MENU twice for MotionSensor stand-by mode. (If cassette is not inserted, “ ” will flash.) • Recording will start about 3 seconds after motion is detected. • Date and time are recorded if displayed in EVF or LCD monitor (page 15). • Recording stops about 30 seconds after motion ceases. To cancel MotionSensor Mode, set POWER to OFF. Note: • MotionSensor recording starts if Camcorder is bumped or repositioned. • This feature is not available during normal recording. • While in MotionSensor stand-by, the following functions are not available: Record/ Pause, Stand-by mode, Digital E.I.S., Video Effects (Auto/Digital Fade). 30 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Viewfinder/LCD Monitor Indications Tape remaining and battery charge level Before you begin... can be displayed. • Connect Camcorder to power source. 2, 3, 4, 5, 6 1 Battery Remaining: Tape Remaining: FULL FULL EMPTY EMPTY 1 Set POWER to CAMERA. 2 Press MENU for MENU mode. Press UP or DOWN to select DISPLAY SET . 3 Press M.FOCUS for DISPLAY SET menu. Press UP or DOWN to select MODE SELECT . 4 Press M.FOCUS for MODE SELECT menu. 5 Press M.FOCUS repeatedly to select the following displays. 6 Press MENU three times to exit. • Tape remaining indicator operates a few seconds after tape starts moving. For Your Information 31 Viewfinder/LCD Monitor Indications Recording the Date and Time 1 Repeat steps 1-5 on page 31 to select time/date, date only, or no display. 1, B, C, D A 2 2 Start a recording (page 17). • Only the Date and/or Time are recorded. Display-Off Mode A Set POWER to CAMERA or VCR. B Press MENU for MENU mode. Press UP or DOWN to select DISPLAY SET . [CAMERA MODE] [VCR MODE] CPress M.FOCUS for DISPLAY SET menu. Press UP or DOWN to select DISPLAY . D Press M.FOCUS to select OFF. Press MENU twice to exit. Indications are restored the next time Camcorder is turned on. 32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Viewfinder/LCD Monitor Indications CAMERA/VCR mode 12 345 6 7 8, 9, 10 11 12 13 14 15 16 17 18 1 Zoom Magnification level (pages 23, 28). 2 Battery Remaining (page 31). “WARNING LOW BATTERY” appears a...