Évaluations - 3, GPA: 3
(
)
)
|
Facilité d'utilisation
Check the list below for symptoms and corrections. Symptom Correction No picture in the EVF... • Make sure a Power Source is connected.(pp. 7,9) • Make sure the POWER switch is set to VCR or CAMERA, (pp. 20, 24) • Check the Dew Indicator, (p. 17) • Make sure the battery is fully charged, (p. 7) • Make sure all necessary cables are connected correctly and firmly, (p. 26) Video cassette can’t be inserted ... * Make sure a Power Source is connected.(pp.7,9) • Insert the cassette with the window side facing out. (p. 10) Video cassette can't be removed ... • Make sure a Power Source is connected.(pp.7,9) No operation starts when operation buttons are pressed... • Check the Dew Indicator, (p. 17) Recording cannot be done ... • Make sure the record tab is still intact, (p. 10) • Check the Battery Indicator, (p. 15) • Check the Dew Indicator, (p. 17) Auto Focus does not operate ... • Make sure the FOCUS button is set to AUTO. (p. 29) * Make sure the unit is ON, with the POWER switch set to CAMERA (p. 20). Sound from microphone can’t be monitored ... • Make sure the unit is set to REC or Record/Pause mode. Camera picture is too dark... • Make sure the HIGH SPEED SHUTTER button is OFF (p. 28). No playback picture, or the playback picture is noisy or contains streaks ... * Press the Clock Set UP A/DOWN ▼ button during playback (Tracking Control) (p. 24). During playback, the picture shows motion or blurred action... * Portions of the still picture where the normal speed motion was particularly rapid may produce this effect. This is normal. “Panasonic ITS VHS! SO ITS TAPES PLAY IN YOUR VCR ..." appears in the EVF and Monitor... • Set the POWER switch to CAMERA, and then hold down STOP for 5 seconds (approx). If the top of your playback picture waves back and forth excessively ... • Because the playback signal is not as stable as an off the air TV signal, the top of your TV screen may be bent or unstable when the tape is played back. This symptom is more noticeable when a tape, recorded on another VCR, is played back. To solve this problem, locate the horizontal hold control on your TV. Turn it slowly to correct the wavy picture. If your TV does not have a horizontal hold control or adjusting the control does not help, some modifications may have to be made to the TV set. Technically this is called “Horizontal AFC time constant change.” If such a problem exists, please contact your local TV service center. (Some nominal service charges may be required.) 42 Request for Service Notice Please photocopy this form when making a request for service notice. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N. Randall Road Elgin, IL. 60123-7847 Attn: Camcorder Repair In the unlikely event this product needs service. • Please include your proof of purchase. (Failure to due so will delay your repair.) •To further speed your repair please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. 43 For Your Information Index of Controls Front View Built-In Twin Capsule 2-Way Microphone System Built-In Lens Cover Opens automatically when the Power Switch is set to CAMERA. Tally Lamp See page 20. MANUAL FOCUS Wheel See page 29. POWER Switch See pages 6, 15, 19, 20, 22, 23, 24, 26, 35. 44 Index of Controls Rear View POWER Lamp Lights when the Power Switch is set to VCR or CAMERA. See pages 6,16. REWIND/SEARCH Button See pages 6, 23, 24. PLAY Button See pages 6, 23, 24, 37. CLOCK SET UP ▲ Button See pages 11, 12,13, 22, 35. (Tracking Control) See page 24. Strap Attachment Rings See page 18. DC IN Connector See page 9. BATTERY RELEASE Button See page 7. STILL Button See pages 23, 24, 37. FAST FORWARD/ SEARCH Button See page 24. STOP Button See pages 6, 15, 24, 37. Audio/Video Output Connector See pages 26, 37. {This connector for use with supplied Audio/Video cable only.) Hand Strap See page 18. RECORD/PAUSE Button with REC Lamp See pages 6, 20, 22, 23; 30, 36. DOWN ▼ Button See pages 11,12, 13, 22, 35. (Tracking Control) See page 24. 45 For Your Information Index of Controls LCD-OPEN button See pages 21, 25. Volume Control See pages 21, 25. Earphone Jack (Monaural) Connect the earphone (M3 type, not supplied) to the earphone jack for monitoring the sound during playback or recording. See pages 21, 25. LCD-POWER Switch See pages 21, 25. LCD (Liquid Crystal Display) Monitor See pages 21, 25. Built-In Speaker PUSH TO CLOSE Button Underside View Vision Adjustment Control See pages 6, 20. Clock Battery Tray See page 14. Tripod Mounting Hole COLOR TINT G G Vivid Pale Reddish Greenish ‘Color Control Adjusts the color intensity. *Tint Control Adjusts the tint for natural fleshtones. BRIGHT imirrrmmni Dark Bright Bright Control Adjusts the brightness of the picture. *Note: These controls have been set at the factory. It is not necessary to adjust these con...