Log:
Évaluations - 3, GPA: 4 ( )

Instructions Panasonic, Modèle AKHC900P

Fabricant : Panasonic
Taille : 397.09 kb
Nom Fichier : AKHC900P.PDF
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


_ How to set the lens . Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*. 1 Turn the lens fixing ring knob counterclockwise to remove the lens mount cap. 2 Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the lens. 3 Connect the lens cable to the lens connector. 4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the rear panel. * Note that there are some lenses uncontrollable with respect to zoom, focus function. BREAKER ZOOM/ FOCUS SDI OUT 1 2 1 / F Remote (zoom/focus control) Cable (When a pan/tilt head is used, connect the cable to the pan/tilt head.) Camera Cable (To Lens Connector) Lens Fixing Ring Knob _ How to install on the camera housing, pan/tilt head, tripod, etc. 1 Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using the camera set-screw hole (1/4-20UNC, 3/8-16UNC). 2 When mounting the camera on a pan/tilt head, be sure to use proper tools and make sure that there is no fear of falling off. 8 How to Set Up the System (Connection) _ Connection of remote control box . Use multi-cable for the connection of HD controller AK-HRP900 and this unit. O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1/ F AK-HC900P YPbPr D-sub 15-pin D-sub 15-pin HD-SDI Multi-cable (5m) AK-HDMLTCA05 Coaxial Cable (5C-FB) HD Monitor Note that the monitor output is attenuated and deteriorated if the cable is too long. External sync signal (3 value sync) Video Input Signal AC Adaptor AW-PS505 DC Power Cable HD Controller NOTE HD Monitor AK-HRP900*1 1 Before connecting the cables, be sure to set the Power Switch of AC Adaptor and HD Controller to OFF. 2 Connect the multi-cable to the interface connector of the camera, and the opposite side to HD Controller. 3 Set the AC Adaptor Power Switch to ON, and the HD Controller Power Switch to ON, then the camera can be controlled. 4 After shooting, set the HD Controller Power Switch to OFF, and the AC Adaptor Power Switch to OFF. *1 To be sold in September 2002 9 Multi-purpose Digital Camera Control System Configuration 1 Remote (zoom/focus control) cable O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1/F HD-SDI D-sub 15-pin D-sub 15-pin Multi-cable (5m) AK-HDMLTCA05 Coaxial Cable (5C-FB) AC Adaptor AW-PS505 HD Monitor Remote controllable lens Multi-purpose Digital Camera AK-HC900P External sync signal (3 value sync) DC Power Cable HD Controller AK-HRP900*1 *1 To be sold in September 2002 10 Multi-purpose Digital Camera Pan/Tilt Head Compatible System Configuration 1 Remote O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1/F G/L I N P b OUT P r / SDI OUT Y / VIDEO OUT 1394 CONTROL IN IP/ R P DC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CS OP O I HD-SDI Pan/Tilt Head Controller AW-RP301 Multi-cable (5m) AK-HDMLTCA05 Coaxial Cable (5C-FB) AC Adaptor AW-PS505 DC Power Cable HD Controller AK-HRP900*1 HD Monitor controllable lens Multi-purpose Digital Camera AK-HC900P External sync signal (3 value sync) Remote (zoom/focus control) cable Pan/Tilt Head AW-PH300A AC Adaptor AW-PS300 DC Power Cable NOTE: Pan/Tilt Head is also compatible with AW-PH500/ PH600. AC Adaptor AW-PS301 *1 To be sold in September 2002 11 Multi-purpose Digital Camera Control System Configuration 2 (System for remotely monitoring picture control) Remote (zoom/focus control) cable Multi-cable (5m) O I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1/ F O I HD-SDI Multi-cable (5m) AK-HDMLTCA05 Coaxial Cable (5C-FB) AC Adaptor AW-PS505 DC Power Cable HD Monitor Remote controllable lens Multi-purpose Digital Camera AK-HC900P AC Adaptor AW-PS505 DC Power Cable AK-HDMLTCA05 Relay box AK-HTF900*1 Transfer HD Controller AK-HRP900*1 *1 To be sold in September 2002 12 Multi-purpose Digital Camera Pan/Tilt Head Compatible System Configuration 2 (System for remotely monitoring picture control) Remote Multi-cable (5m) AK-HDMLTCA05 I BREAKER ZOOM/ FOCUS SDI OUT 1 2 1/ F G/L I N P b OUT P r / SDI OUT Y / VIDEO OUT 1394 CONTROL IN IP/ R P DC12V IN CAMERA I/F LENSE I/F ND/EXT SDI IN CS OP O I O I HD-SDI Coaxial Cable (5C-FB) AC Adaptor AW-PS505 DC Power Cable HD Controller AK-HRP900*1 HD Monitor controllable lens Multi-purpose Digital Camera AK-HC900PRemote (zoom/focus control) cable Pan/Tilt Head AW-PH300A AC Adaptor AW-PS300 DC Power Cable NOTE: Pan/Tilt Head is also compatible with AW-PH500/ PH600. Transfer AC Adaptor AW-PS505 Pan/Tilt Head Controller AW-RP301 Multi-cable (5m) AK-HDMLTCA05 Relay box AK-HTF900*1 AC Adaptor AW-PS301 *1 To be sold in September 2002 13 Operation Procedure 1 Turn on the power of each equipment. 2 Properly adjust the light for the object. 3 Adjust the flange back of the lens, the iris and the focus. . Flange back must be adjusted when the camera is used for the first time or after replacement of the lens. 4 Adjust the white balance. . This adjustment is needed when the camera is used for the first time or after leaving unused for a long time. . The adjustment is necessary when the lighting condition or brightness is changed. . After adjusting ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories