Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Check the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Precautions for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Controls and their Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 _Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 _Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 _Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 How To Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 _Lens connection in the case of no swivel stand . . . . . . . . . . . . . . . . . . . . . . .13 Multi-purpose digital camera control system configuration 1 . . . . . . . . . . . . . . .14 Multi-purpose digital camera control system configuration 2 . . . . . . . . . . . . . . .15 Multi-purpose digital camera control system configuration 3 . . . . . . . . . . . . . . .16 Communication speed setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Example of Rack Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 _How to rack-mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 _How to change the rear panel position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Appearance and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Outline . This unit is a camera controller for multi-purpose camera (AK-HC900P). This unit is connected to a multi-purpose camera with one multi-cable, and capable of transmitting and receiving various camera and lens control signals, analog picture signals of cameras, and generator lock signals (3-value SYNC). . The extension distance between this unit and the camera is 33 ft (10m) max. . It is possible to control the swivel stand from the pan-tilt control panel AWRP301 by using the swivel stand control input connector. Check the Accessories Coupling . . . . . . . . . . . . . . . . . . . . . . .1 pc Setscrews . . . . . . . . . . . . . . . . . . . . .8 pcs Multi-cable . . . . . . . . . . . . . . . . . . . . . .1 pc M4 x 8 mm . . . . . . . .4 pcs Seal . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc M5 x 8 mm . . . . . . . .4 pcs Precautions for Use . We recommend that the AC adapter AW-PS505P is used for power supply. . Handle the unit with care. If dropped or given a strong shock, it may cause a trouble or accident. . Use the unit in a temperature range of 32oF to 104oF (0oC to + 40oC). If used at a temperature below 32oF or higher than 104oF, it may cause bad influences to the component parts. . Turn off the power before connecting or disconnecting the cable. When connecting or disconnecting the cable, be sure to turn off the power switch of the unit beforehand. . Avoid using the unit outdoors. . Install the unit 3.3 ft (1 m) away from the monitor. . Maintenance Pull out the power cord plug and clean the unit with dry cloth. If it is hard to clean, moisten the cloth with a diluted neutral detergent solution and squeeze it well and lightly wipe the unit. Precautions . Do not use volatile solvents such as benzene or thinner. . When using a chemical mop, carefully read the instructions. 123<=> ? @ A B C D E F G KL 4 5 6 7 8 9 Controls and their Functions _Operation panel : ;HIJ 1 Power indication LED [POWER] It is lighted green when the power control switch 2 is ON. It goes out when the power control switch 2 is OFF. 2 Power control switch [POWER ON/OFF] With this switch turned ON, the unit and the camera connected are simultaneously turned on. With it turned OFF, both of the unit and the camera are turned off. 3 SD card slot [SD CARD] With an SD card inserted, the camera setting data can be recorded on the SD card. 4 Tally LED [TALLY] It is lighted red when tally signal is input to the tally signal input terminal Q. Controls and their Functions 5 Menu operation switch [MENU] Operation switch for camera menu. Item selection or data change can be done by turning this switch. When this switch pushed, the item and data are settled. 6 Menu ON switch [MENU ON] Used to turn the camera menu ON/OFF. 7 Preset memory switch [MEMO] Preset memory can be done up to 5 points with respect to lens zoom, focus, and iris position (when iris select switch K is at [MANU]). When using the preset memory, first set the lens focus, zoom, and iris. Next, push this switch, then the switch is lighted. Subsequently, pus...