Évaluations - 4, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
q; See [BEEP] on page 44. To initialize the settings (RESET)................................ 8 Press RESET 8 to initialize all the settings, including the setting of the date and time. Other part names and functions D Internal stereo microphone I Speaker Playback sound comes out from the speaker. • For how to adjust the volume, see page 21. Recording/ Playback 23 Indicators displayed during recording/playback Recording Viewing 123 45 6 A Remaining battery (approx.) B Recording mode (SP or LP) (42) C Recording status ([STBY] (standby) or [REC] (recording)) D Recording: Tape counter (hour: minute: second) Playback: Time code (hour: minute: second: frame) E Recording capacity of the tape (approx.) (43) F Function button (30) Data code during recording The date/time during recording and the camera setting data will be recorded automatically. They do not appear on the screen during recording, but you can check them as [DATA CODE] during playback (p. 35). 1274 5 86 G Tape transport indicator H Video operation buttons (21) ( ) is a reference page. The indicators during recording will not be recorded. Bottom Indicators when you made changes Indicator Meaning Flexible spot meter (32)/ You can use [DISP GUIDE] (p. 14) to Manual exposure (34) check the function of each indicator that appears on the LCD screen. 9 Manual focus (32) • Some of the indicators may not appear when . Backlight (22) you use [DISP GUIDE]. PROGRAM AE (38) Upper left Upper right Picture effect (38) n White balance (34) Wide select (40) SteadyShot off (40) Panel off (33) EDIT EDITSEARCH (40) +/ 0:00:00STBY FN+EDIT 60min 60min / Bottom Center Upper left Indicator Meaning AUDIO MODE (42) Upper right Indicator Meaning DV input (47) Center Indicator Meaning NightShot plus (22) % Z Warning (58) Recording/ Playback 25 Searching for the starting point Make sure that the CAMERA lamp lights up (p. 20). Searching for the last scene of the most recent recording (END SEARCH) [END SCH] (END SEARCH) will not work once you eject the cassette after you have recorded on the tape. Touch t [PAGE1], then touch [END SCH]. 60min 0:00:00 PAGE1 PAGE2 SPOT FOCUS FOCUS MENU FADER END SCH EXPO– SURE SPOT METER DISP GUIDE Touch here again to cancel the operation. The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished. • [END SCH] will not work correctly when there is a blank section between recorded sections on the tape. • This operation is also available when the POWER switch is set to PLAY/EDIT. Searching manually (EDIT SEARCH) You can search for the start point to start the next recording while viewing the pictures on the screen. The sound is not played back during the search. 1 Touch t [PAGE1] t [MENU]. 2 Select (CAMERA SET) with / , then touch [EXEC]. 3 Select [EDITSEARCH] with / , then touch [EXEC]. 4 Select [ON] with , then touch [EXEC] t . / 60min STBY 0:00:00 EDIT FN 5 Touch and holdbackward)/ (to go (to go forward) and release it at the point where you want the recording to start. Reviewing the most recently recorded scenes (Rec review) You can view a few seconds of the scene recorded just before you stopped the tape. 1 Touch t [PAGE1] t [MENU]. 2 Select (CAMERA SET) with / , then touch [EXEC]. 3 Select [EDITSEARCH] with / , then touch [EXEC]. 4 Select [ON] with , then touch [EXEC] t . / 60min STBY 0:00:00 EDIT FN 5 Touch . The last few seconds of the most recently recorded scene are played back. Then, your camcorder is set to the standby. Recording/ Playback 27 Playing the picture on a TV You can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting cable (1) or the A/V connecting cable with S VIDEO (2). Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p. 9). Refer also to the instruction manuals supplied with the devices to be connected. A/V OUT 21A/V OUT jack (Yellow) (White) (Red) : Signal flow VCRs or TVs A A/V connecting cable (supplied) B A/V connecting cable with S VIDEO (optional) When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable, pictures can be reproduced more faithfully than with the supplied A/V cable connection. Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable. In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output audio. • You can display the time code on the TV screen by setting [DISP OUT] to [V-OUT/LCD] (p. 44). When connecting your camcorder to a TV through a VCR Connect your camcorder to the LINE IN input on the VCR. Set the input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.), if the VCR has an input selector. When your TV is monaural (Only one audio input jack) Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white (left chann...
Ce manuel est également adapté pour les modèles :Caméscopes - DCR-HC28E (1.38 mb)