3. Perform playback. - You can perform playback, recording or make settings in the menu while viewing on your TV screen. 86_ English • Adjust the sound volume on TV. • The remote control is useful when operating the DVD camcorder while viewing an image on TV screen. (SC-DX105 only) • If only a mono audio input is available on the connected device (TV, etc.), use the audio cable with the white jack (Audio L). • When a copy-protected movie is played back, no image will appear on TV screen. • When “TV Display” is set to “Off,” OSD(On-Screen-Display) does not appear on the TV screen. .page 81 • Information that the DVD camcorder is recording will appear on the TV screen: Press the Display ( )button to switch the display status. .page 26 • Howling may occur when the DVD camcorder is too close to the other devices or the volume is high. Keep the DVD camcorder a reasonable distance away from the other connected devices. Image display depending on TV screen ratio Storage DISC CARD (SC-DX103/ DX105 only) Recording ratio Movie images recorded in the 16:9 ratio (16:9 Wide: On) Movie images recorded in the 4:3 ratio (16:9 Wide: Off) • Movie images • Photo images Wide (16:9) TV 4:3 TV • Refer to page 72 for “16:9 Wide” setting. English _87 connecting to AV devices DUBBING IMAGES FROM THE CAMCORDER TO A VCR OR DVD/HDD RECORDER You can dub images played back on this DVD camcorder onto other video devices, such as VCRs or DVD/HDD recorders. Use the provided AV cable to connect the DVD camcorder to another video device as shown in the following figure: 1. Slide the POWER switch downwards to turn the power on, then open the LCD screen. .page 21 • Set the appropriate storage media. (SC-DX103/ DX105 only) .page 30 2. Press the MODE button to set the Play mode. 3. Use the Joystick to select the recorded (dubbed) image in the thumbnail index view, then press the Joystick. 4. Press the record button on the connected device. • The DVD camcorder will start playback and the recording device will dub it. • Refer to “Editing chapter” to create a playlist by selecting desired scenes from those recorded on this DVD camcorder. .pages 40~46 • Audio is heard from the speaker. If the volume is too high, noise may enter the dubbed image. • Be sure to use the AC power adaptor to power the DVD camcorder to prevent battery power from shutting off during recording on another video device. ........ VCRs or DVD/HDD recorders Signal flow AV cable DVD camcorder 88_ English USING VOICE PLUS • The Voice Plus function works only in the DVD camcorder play mode. .page 38 • This function enables you to narrate over a pre-recorded disc via the DVD camcorder’s microphone. • When you want to copy a DVD onto other AV devices (DVD recorder, VCR), you can dub your voice sound incoming from the internal microphone of your DVD camcorder to an AV device, instead of copying the audio signals on a pre-recorded disc. 1. Connect the DVD camcorder to your AV device with AV cable. .page 86 2. Set the Storage mode switch to DISC. (SC-DX103/ DX105 only) .page 30 3. Insert the disc you wish to play back in this DVD camcorder. 4. Press the MODE button to set the Play mode. 5. Use the Joystick to select the desired image. 6. Press the Recording start/stop button on a point where you want during the playback. • Voice Plus icon ( ) is displayed and “Voice +” will blink for a while. ........ TV Signal flow AV cable DVD camcorder 0:00:59 Voice + 012 • Sound signals incoming from the internal microphone will be dubbed to a connected AV device, instead of copying the pre-recorded sound on a disc. 7. To cancel, press the Recording start/stop button again. • Voice Plus is available only when the AV cable is connected. If a USB cable is connected, the Voice Plus function may not operate properly.(SC-DX103/DX105 only) • If you perform Stop, Play/Pause, REW, or FF while the Voice Plus function is being executed, the Voice Plus function will be deactivated. • When the Voice Plus function is in progress, the MENU button or PHOTO button does not work. • The Voice Plus function does not affect the original sound on the recorded disc. • Sound is transferred from the internal microphone on this DVD camcorder to the connected AV device, when using the Voice Plus function. Make sure the microphone is not covered or blocked in any way. • Adjust the sound volume on the connected external device. (TV, audio system etc.) • Feedback may occur if the DVD camcorder is placed near the speaker of an external device. • Turn down the volume of the external device and keep the DVD camcorder a reasonable distance away. English _89 connecting to a PC( SC-DX103/ DX105 only) This chapter explains how to connect the camcorder to a PC using the USB cable for various functions. . When connecting a USB cable to a PC, refer to the software installation instructions and PC specifications below. SYSTEM REQUIREMENTS DV Media PRO Following requirements must be satisfied to use DV Media PRO. OS CPU Windows Vista(32bit,...

Ce manuel est également adapté pour les modèles :
Caméscopes - SC-DX100 (15.9 mb)
Caméscopes - SC-DX103 (15.9 mb)
Caméscopes - SC-DX105 (15.9 mb)