Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
WHEN YOU HAVE FINISHED RECORDING 1 Make sure that the ACCESS indicator is off. 2 Turn off the camcorder. 3 Close the LCD panel. IMPORTANT Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory. -Do not open the memory card slot cover. -Do not disconnect the power source or turn off the camcorder. -Do not change the position of the mode dial. NOTES • About the Power Save mode: To save power when the camcorder is powered by a battery pack, the camcorder will automatically shut off if left without any operations for 5 minutes ( 80). Press to turn on the camcorder. ON/OFF • When recording in bright places it may be difficult to use the LCD screen. In such case, change the brightness of the LCD screen ( 22, 79). 32 Selecting the Video Quality (Recording Mode) The camcorder offers 3 recording modes. Changing the recording mode will change the recording time available on the memory. Select XP mode for better movie quality; select LP mode for longer recording times. The following table gives approximate recording times. FUNC. ( 26) [ STANDARD PLAY 6Mbps] Desired recording mode NOTES • The camcorder uses a variable bit rate (VBR) to encode video so the actual recording times will vary depending on the content of the scenes. • The camcorder retains the last setting used even if you set the camcorder to mode. Zooming: Optical, Advanced and Digital Zoom The camcorder offers three types of zoom: optical, advanced and digital zoom when recording movies. (In mode only the optical zoom is available.) ( 24) FUNC. FUNC. Approximate recording times .. Default value Recording mode Memory XP SP• LP 1 GB memory card 10 min. 20 min. 35 min. 2 GB memory card 25 min. 40 min. 1 hr. 15 min. 4 GB memory card 55 min. 1 hr. 20 min. 2 hr. 35 min. Built-in memory/ 8 GB memory card 1 hr. 50 min. 2 hr. 45 min. 5 hr. 10 min. Built-in memory/ 16 GB memory card 3 hr. 40 min. 5 hr. 30 min. 10 hr. 25 min. When a recording exceeds 4 GB, it will be divided and saved as scenes smaller than 4 GB. 33 Video Selecting the Zoom Type ( 24) Options .. Default value [ OPTICAL] (37x) The zoom range is limited to the optical magnification ratio of the lens. [ ADVANCED].. (Advanced Zoom) In addition to the optical zoom range, the camcorder processes the image digitally to obtain a larger zoom range without any deterioration in image quality. When recording movies with a 16:9 aspect ratio, the field of view (picture angle) will change. Refer to the table in the NOTES section. [ DIGITAL] (2000x) When this option is selected, the camcorder will switch to digital zoom (light blue area on the zoom indicator) when you zoom in beyond the optical zoom range (white area on the zoom indicator). With the digital zoom the image is processed digitally so image quality will deteriorate the more you zoom in. FUNC. ( 26) FUNC. [ MENU] [ CAMERA SETUP] [ZOOM TYPE] Desired option FUNC. NOTES • In mode, the zoom type is automatically set to [ ADVANCED]. • The zoom range of the advanced zoom will change depending on the aspect ratio of the scene ( 76). [WIDESCREEN] set to [ ON] (16:9) 48x* * The picture angle will be wider at both full telephoto and full wide-angle. [WIDESCREEN] set to [ OFF] (4:3) Using the Zoom 55x ( 24) W TW T W Zoom out T Zoom in Move the zoom lever toward W to zoom out (wide-angle). Move it toward T to zoom in (telephoto). Press gently for a slow zoom; press harder for faster zooms. You can also set [ZOOM SPEED] ( 76) to one of three constant speeds (3 is the fastest, 1 the slowest). NOTES • Keep at least 1 m (3.3 ft.) away from the subject. At full wide angle, you can focus on a subject as close as 1 cm (0.39 in.). • When [ZOOM SPEED] is set to [ VARIABLE]: -When you use the T and W buttons on the wireless controller or LCD panel, the zoom speed will be constant at [ SPEED 3]. -The zoom speed will be faster in record pause mode than when actually recording. Quick Start Function When you close the LCD panel with the camcorder on, the camcorder enters the standby mode. In standby mode the camcorder consumes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you open the LCD panel, the camcorder is ready to start recording in approximately 1 second, ensuring you do not miss important shooting opportunities. ( 24) 1 With the camcorder on and in a recording mode, close the LCD panel. A beep will sound and the indicator will change to orange to indicate the camcorder entered the standby mode. 2 When you wish to resume recording, open the LCD panel. Within less than 1 second, the indicator will return to green and the camcorder will be ready to record. IMPORTANT Do not disconnect the power source during standby mode (while the indicator is lit in orange). NOTES • If you close the LCD panel under some circumstances (for example while recording, while a menu is being displayed, while the battery charge is...
Ce manuel est également adapté pour les modèles :Caméscopes - FS10 (3.36 mb)
Caméscopes - FS11 (3.36 mb)