Évaluations - 3, GPA: 3.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Move the adapter away from the TV or the antenna cable. . Do not connect any products that are not expressly recommended to the camcorder’s DC IN terminal or to the power adapter. . You may hear some noise from the power adapter during use. This is not a malfunction. 13 Attaching and Charging the Battery Pack E Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message “CHANGE THE BATTERY PACK” appears. 1. Turn the POWER switch to OFF. q 2. Move the viewfinder upward. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Align the end of the battery pack with the line on the camcorder, press lightly and slide it in the direction of the arrow until it clicks. e w OFF (VCR) PLAY CAMERACAMERA POWERPOWER y t r DC IN 8.4V CARD/ CHARGE click CHARGE indicator DC IN terminal Masteringthe Basics 4. Connect the power cord to the adapter. 5. Plug the power cord into a power outlet. 6. Connect the power adapter to the camcorder’s DC IN terminal. 7. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter. 8. Remove the battery pack after use. Press the BATT. button to remove the battery. . The battery pack may be defective when the CHARGE indicator flashes rapidly. . The CHARGE indicator informs you about the charge status. 0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Glows steadily . Do not disconnect and reconnect the power cord while charging a battery pack. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder. 14 E Charging, Recording and Playback Time Below times are approximate and vary according to the charging, recording or playback conditions. Charging Time Battery Pack Charging Time BP-508 (MV630i/MV600i/MV600) 110 min. BP-512 (MV650i/optional) 120 min. BP-511 (Optional) 120 min. BP-522 (Optional) 210 min. BP-535 (Optional) 310 min. • Charge the battery pack in temperatures between 5. C and 40. C. • A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging. Recording Time Battery Pack Maximum Recording Time Typical Recording Time* Using the Viewfinder Using the LCD Using the Viewfinder Using the LCD BP-508 (MV630i/MV600i/MV600) 100 min. 75 min. 55 min. 40 min. BP-512 (MV650i/Optional) 180 min. 140 min. 95 min. 75 min. BP-511 (Optional) 180 min. 140 min. 95 min. 75 min. BP-522 (Optional) 370 min. 295 min. 195 min. 155 min. BP-535 (Optional) 590 min. 470 min. 315 min. 250 min. Masteringthe Basics * Approximate times for recording with repeated operations such as start/stop, zooming, power on/off. Actual time may be shorter. • We recommend that you prepare battery packs 2 to 3 times longer than you think you might need. • To conserve battery charge, turn off the camcorder instead of leaving it in record pause mode. Playback Time Battery Pack Playback Time Using the LCD BP-508 (MV630i/MV600i/MV600) 70 min. BP-512 (MV650i/optional) 125 min. BP-511 (Optional) 125 min. BP-522 (Optional) 250 min. BP-535 (Optional) 400 min. E How much power is left? The battery symbols indicate the charge status of the battery pack. When the battery pack is empty, “CHANGE THE BATTERY PACK” appears for 4 seconds and starts flashing. The battery charge indicators are not constant – they vary according to the condition under which battery pack and camcorder are used. Battery Pack Handling Precautions DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 60. C. Do not leave it near a heater or inside a car in hot weather. • Do not try to disassemble or modify it. • Do not drop or knock it. • Do not get it wet. Masteringthe Basics . Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge. . Attach the terminal cover whenever a battery pack is not in use. Contact to metallic objects may cause a short circuit and damage the battery pack. . Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth. . Since storing a charged battery pack for a long time (about 1 year) can shorten its lifecycle or affect performance, we recommend to discharge the battery pack fully and to store it in a dry place at temperatures no higher than 30° C. If you do not use the battery pack for long periods, charge and discharge it fully at least once a year. If you have more than 1 battery pack, perform these precautions at the same time for all battery packs. . Although the battery pac...