Évaluations - 2, GPA: 4.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode waveform. [Field]: Sets the waveform monitor to field display mode. [RGB]: Functions like an RGB parade scope. [YPbPr]: Functions like a YPbPr parade scope. Video Scopes Configuring the Vectorscope [w Other Functions] The camcorder’s vectorscope function offers 2 modes. You can also change the gain. [WFM (LCD)] 89 1 Open the [Vectorscope] submenu. [w Other Functions] > [WFM (LCD)] > [Vectorscope] [Vectorscope] 2 Select the desired option and then press SET. [Normal] • If you do not need to change the gain, you do not need to perform steps 3 and 4. 3 Open the vectorscope [Gain] submenu. [w Other Functions] > [WFM (LCD)] > [Gain] (under [Vectorscope]) 4 Select [1x] or [5x] and then press SET. Options [Spot]: The color signal of the area in the red frame is displayed in red on top of the [Normal] mode waveform. [Normal]: Displays the vectorscope. Configuring the Edge Monitor [w Other Functions] Using this video scope allows you to focus with more precision. You can use the edge monitor along with the other focus assistance functions [WFM (LCD)] (A 70). The edge monitor features 2 modes. 1 Open the [Edge Monitor] submenu. [Edge Monitor] [w Other Functions] > [WFM (LCD)] > [Edge Monitor] 2 Select the desired option and then press SET. [Type 1] • If you do not need to change the gain, you do not need to perform steps 3 and 4. 3 Open the edge monitor [Gain] submenu. [w Other Functions] > [WFM (LCD)] > [Gain] (under [Edge Monitor]) 4 Select the desired gain value and then press SET. Options [Type 1]: The waveform that represents the focus of the entire picture is displayed in green. In addition, the waveform of the area in the three red frames is displayed in red on top of the previous waveform. [Type 2]: This mode displays the edge monitor with the waveform monitor in [Line+Spot] mode. The waveform monitor appears on the left in green while the edge monitor appears on the right in blue. The waveform of the area in the red frame is displayed in red on top of the edge monitor waveform. Adding Marks while Recording Adding Marks while Recording When recording, you can flag an important shot in a clip by adding a “shot mark” (!). There are two types of shot marks, shot mark 1 (") and shot mark 2 (#), and you can add either or both types to a single clip. You can 90 also add an OK mark ($) or check mark (%) to the entire clip to flag clips you want to set apart. You can add all four types of marks remotely using the Wi-Fi Remote application. When the camcorder is in mode, you can add or delete shot marks (A 124). You can also display an index screen of all the shot marks (A 123), allowing you to find a particular scene in a clip more quickly. Operating modes: Adding Shot Marks while Recording To add a shot mark to a clip while recording, you must first set in advance an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2]. 1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (A 99). • To add both shot marks, set one assignable button to [Add Shot Mark 1] and another assignable button to [Add Shot Mark 2]. 2 While you are recording, press the assignable button at the beginning of the shot you wish to mark. • A message indicating the short mark will appear and the selected shot mark will be added to the current frame of the clip. • You can press the button again to add another shot mark. Up to 100 shot marks (" and # marks combined) can be added to a single clip. Remote Operation Using Wi-Fi Remote After completing the necessary preparations (A 47) you can set a shot mark ("or #) remotely from a Wi-Fienabled device using the Wi-Fi Remote application. 1 While recording a clip, press [SHOT MARK1] on the Wi-Fi Remote screen to set a shot mark 1 or [SHOT MARK2] to set a shot mark 2. • [Shot Mark1] or [Shot Mark2] will be displayed on the Wi-Fi Remote screen and the shot mark will be applied to the clip. 2 Press to close the message. Adding Marks while Recording NOTES • There may be up to a 0.5 second delay from when you press the button to when the camcorder adds the shot mark. When using the Wi-Fi Remote application, the delay may be longer depending on the conditions of the wireless signal. • When you are using interval recording or frame recording mode, you cannot add shot marks to a clip. • When a clip contains either shot mark, !will appear next to the clip’s thumbnail in the playback index screen. Adding an $Mark or % Mark to the Last Clip Recorded After recording an important clip, you can add an OK mark ($) or check mark (%) to the clip to flag it and set it apart. When the camcorder is in mode, you can display an index screen that contains only clips with an $ mark or only clips with a % mark (A 114). Furthermore, you can use the $ mark to protect important clips, as clips with an $ mark cannot be deleted. To add an $ mark or % mark to the last clip recorded in mode, you must first set in advanc...
Ce manuel est également adapté pour les modèles :Caméscopes - EOS C300 (9.51 mb)