Évaluations - 1, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Canon’s TS-E lenses are tilt-shift lenses designed for EOS cameras. The tilt-shift mechanism enables photographers to control the depth of field and the area photographed and to correct image distortion, making it possible to take sophisticated pictures that cannot be shot using a conventional lens. . To ensure that you make the most of the TS-E lens functionality, it is recommended that you use it with an EOS camera with 100% viewfinder visibility (EOS-1, EOS-1D or EOS-1Ds series) and use the laser matte with grid focusing screen Ec-D and tripod. . On EOS cameras with a built-in flash, some restrictions may apply to the shift and functions. . On EOS cameras equipped with shooting, some partial restrictions shift and rotation functions. Features 1. The lens can be tilted up to ± 8° and shifted up to ± 11mm. 2. The tilt and shift functions can be used singly or in combination. 3. The lens can be rotated to change the tilt or shift direction. Conventions used in this instruction Warning to prevent lens or camera malfunction or damage. Supplementary notes on using the lens taking pictures. ENG-1 a Safety Precautions a Safety Precautions 1. Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. 2. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached. This is to prevent the lens from concentrating the sun’s rays, which could cause a fire. a Handling Cautions If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment. Then take out the lens after it has warmed gradually. Do the same when taking the lens from a warm environment a cold one. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur a particular installation. If this equipment does cause interference to radio or television reception, which determined by turning the equipment off and on, the user is encouraged to try to correct the interference the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between • Consult the dealer or an experienced help. This digital apparatus noise emissions from interference-causing Apparatus”, ICES- ENG-2 Nomenclature Tilt knob ( > 7) Lens mount index ( > 5) Contacts Shift index Shift scale ( > 9) Shift knob ( > 9) Depth-of-Field scale ( > 11) Distance scale ( > 5,11) Distance index Infrared index ( > 11) Tilt scale ( > 7) Tilt index For detailed information, > **). ENG-3 Tilt lock knob ( > 7) Filter mounting thread ( > 14) Focusing ring ( > 5) Tilt index Tilt scale ( > 7) Tilt lock knob ( > 7) Filter mounting thread ( > 14) Focusing ring ( > 5) Tilt index Tilt scale ( > 7) Nomenclature Hood mount ( > 13) Shift index Rotation lock release button ( > 10) Lens Shift scale ( > 9) Shift lock knob ( > 9) For detailed information, > **). ENG-4 1. Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. . When mounting or detaching the lens, always ensure that the tilt and shift scales are set to the “0” position. . After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. . If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. . If the contacts get soiled or have fingerprints them, clean them with a soft cloth. . If you remove the lens, cover it with the cap. To attach it properly, align the lens mount index and the • index of the dust cap, and turn clockwise. To remove ...
Ce manuel est également adapté pour les modèles :Caméscopes - TS-E 90mm f/2.8 (2.96 mb)
Caméscopes - TS-E 45mm f/2.8 (2.96 mb)